Methods of preparing the layout for printing flexo

Authors

  • Игорь Викторович Левыкин Харьковский национальный университет радиоэлектроники пр. Ленина, 14, г. Харьков, Украина,61116, Ukraine
  • Светлана Геннадьевна Власенко Харьковский национальный университет радиоэлектроники пр. Ленина, 14, г. Харьков, Украина,61116, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2011.2457

Keywords:

Flexography, model, profile, montage, distortion

Abstract

The article is dedicated to the relevant topic of prepress preparation of model to printing by flexography method. Methodology of model preparation is worked out based on practical material

Author Biographies

Игорь Викторович Левыкин, Харьковский национальный университет радиоэлектроники пр. Ленина, 14, г. Харьков, Украина,61116

Доцент

Кафедра инженерной и компьютерной графики

Светлана Геннадьевна Власенко, Харьковский национальный университет радиоэлектроники пр. Ленина, 14, г. Харьков, Украина,61116

Студентка

Кафедра инженерной и компьютерной графики

References

  1. Алексей Титов. Определение растискивания во флексографии. Журнал «Флексо Плюс», 2007
  2. Донни О'Куин. «Допечатная подготовка. Руководство дизайнера», 2001

Downloads

How to Cite

Левыкин, И. В., & Власенко, С. Г. (2012). Methods of preparing the layout for printing flexo. Eastern-European Journal of Enterprise Technologies, 1(10(49), 28–30. https://doi.org/10.15587/1729-4061.2011.2457

Issue

Vol. 1 No. 10(49) (2011): Information and control systems

Section

Information and controlling system

License

Copyright (c) 2014 Игорь Викторович Левыкин, Светлана Геннадьевна Власенко

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.