Reliability of technological system from accuracy of product manufacturing

Authors

  • Наталия Юрьевна Ламнауэр Кафедра экономики промышленного предприятия и маркетинга Украинская инженерно-педагогическая академия, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2010.2605

Keywords:

quality, technological system, reliability, accuracy

Abstract

The reliability model of the technological system is offered with dependence of refuse on accuracy of product manufacturing and its parameters are found.

Author Biography

Наталия Юрьевна Ламнауэр, Кафедра экономики промышленного предприятия и маркетинга Украинская инженерно-педагогическая академия

Кандидат технических наук, старший преподаватель

References

  1. Ламнауэр Н. Ю. Расчёт показателя качества технологической системы во времени // Восточно-Европейский журнал передовых технологий. – 2009- 6/7 (42)/- C. 59 – 62.
  2. Справочник по надёжности. Том 1/ Под ред. Б. Р. Левина. – М.: Мир, 1969. – 339 с.
  3. Гаскаров Д. В., Шаповалов В. И. Малая выборка. – М.: Статистика, 1978. – 248 с.
  4. Дэйвид Г. Порядковые статистики. – М.: Наука. Главная редакция физико-математической литературы, 1979. – 336 с.
  5. Ламнауер Н. Ю. Економічна доцільність вибору технології при виготовленні виробів машинобудування на основі прогнозування браку по параметру лінійного розміру // Вестник национального технического университета «ХПИ» - 36’ 2009 – C. 115 – 121.
  6. Куцин А. Н., Созонов Ю. И. Оценка качества технических систем // Сборка в машиностроении, приборостроении, М.: – 2004. - №7.- С. 23-27.

Downloads

Published

2010-01-29

How to Cite

Ламнауэр, Н. Ю. (2010). Reliability of technological system from accuracy of product manufacturing. Eastern-European Journal of Enterprise Technologies, 1(7(43), 19–22. https://doi.org/10.15587/1729-4061.2010.2605

Issue

Vol. 1 No. 7(43) (2010): Mathematics and cybernetics - fundamental and applied aspects

Section

Mathematics and Cybernetics - applied aspects

License

Copyright (c) 2014 Наталия Юрьевна Ламнауэр

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.