The measuring converter for control of the fatigue condition of metal of gear drives on-stream of the mining equipment

Authors

  • Д.В. Прядченко Кафедра «Электромеханика» Восточноукраинский Национальный университет имени Владимира Даля г. Луганск, Ukraine
  • Валерий Владимирович Яковенко Кафедра «Электромеханика» Восточноукраинский Национальный университет имени Владимира Даля г. Луганск, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2010.2663

Keywords:

geometrical model, measurings transformers, informing

Abstract

The checking of gearings system is offered in work, basis of which is measurings transformers of the promoted informing, their location and construction, and also geometrical model of their magnetic system. Rejections, fixed a measuring transformer, are indicated.

Author Biographies

Д.В. Прядченко, Кафедра «Электромеханика» Восточноукраинский Национальный университет имени Владимира Даля г. Луганск

Аспирант

Валерий Владимирович Яковенко, Кафедра «Электромеханика» Восточноукраинский Национальный университет имени Владимира Даля г. Луганск

Доктор технических наук, профессор, заведующий
кафедрой

References

  1. Поливанов К. М. Теоретические основы электротехники, ч. 3, М. – 1982 – 340с.
  2. Розенблат М. А. Магнитные элементы автоматики и вычислительной техники. – М.: Наука, 1966 – 542с.
  3. Беркман Р. Я., Мартынюк-Лотоцкий Р. Е. Об общности и существенных различий в анализе условий возбуждения магнитных модуляторов и феррозондов. – В кн.: Элементы систем отбора и передачи информации. К. 1985 – 103с.

Downloads

Published

2010-04-06

How to Cite

Прядченко, Д., & Яковенко, В. В. (2010). The measuring converter for control of the fatigue condition of metal of gear drives on-stream of the mining equipment. Eastern-European Journal of Enterprise Technologies, 2(5(44), 19–22. https://doi.org/10.15587/1729-4061.2010.2663

Issue

Vol. 2 No. 5(44) (2010): The applied physics and materials technology. The applied mechanics

Section

Applied mechanics

License

Copyright (c) 2014 Д.В. Прядченко, Валерий Владимирович Яковенко

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.