Dynamic force in rope at multilayered coiling

Authors

  • Наталія Миколаївна Фідровська Кафедра промислового і автомобільного транспорту Українська інженерно-педагогічна академія м. Харків, Ukraine
  • Іван Сергійович Варченко Кафедра промислового і автомобільного транспорту Українська інженерно-педагогічна академія м. Харків, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2010.2671

Keywords:

rope drum, compression, deformation, rope pull

Abstract

In this article considered dynamic forces arising up in rope at multilayered coiling. Expected and the graphs of declining of rope section are shown out from position of equilibrium, nascent tensions in transition of rope from a layer in a layer and certain influence of rope diameter on dynamic

Author Biographies

Наталія Миколаївна Фідровська, Кафедра промислового і автомобільного транспорту Українська інженерно-педагогічна академія м. Харків

Кандидат технічних наук, доцент, завідувач кафедрою

Іван Сергійович Варченко, Кафедра промислового і автомобільного транспорту Українська інженерно-педагогічна академія м. Харків

Аспірант

References

  1. Ковальський Б. С.,Кожин В. С. , Барабаны грузоподъемных машин Харьков ХВКИУ 1964, 164 с.
  2. Почтовенко Ю.Є. Деякі елементи динаміки двошарової навивки канатів на барабанах. – В.кн.: Підйомно-трансп. устаткування «Техніка», Київ, 1970.
  3. Ковальський Б. С., Фидровская Н. М. Расчет нагрузок стенки канатного барабана. // Подъемно транспортное оборудование. // Респ. Межвед научн.-техн Сб. // 1984 выл 15 с. 14-17.
  4. Александров М.П. Грузоподъемные машины Москва 2000 р. 550с.

Downloads

Published

2010-04-06

How to Cite

Фідровська, Н. М., & Варченко, І. С. (2010). Dynamic force in rope at multilayered coiling. Eastern-European Journal of Enterprise Technologies, 2(5(44), 58–61. https://doi.org/10.15587/1729-4061.2010.2671

Issue

Vol. 2 No. 5(44) (2010): The applied physics and materials technology. The applied mechanics

Section

Applied mechanics

License

Copyright (c) 2014 Наталія Миколаївна Фідровська, Іван Сергійович Варченко

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.