Superficial finishing processing of products

Authors

  • В.В. Джемелінський Кафедра лазерної техніки фізико-технічних технологій Національний технічний університет України “Київський політехнічний інститут”, Ukraine
  • Д.А. Лесик Кафедра лазерної техніки фізико-технічних технологій Національний технічний університет України “Київський політехнічний інститут”, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2010.2673

Keywords:

supersonic atomization, Laval nozzle, aerosol stream, cleaning, surface polishing

Abstract

The offered method of superficial finishing processing of products aerosol supersonic ternary stream which is formed by ultrasonic dispersion of a hydroabrasive mix and a rotary motion of compressed air, can be used for clearing, polishing, and also preparation of surfaces of details under covering.

Author Biographies

В.В. Джемелінський, Кафедра лазерної техніки фізико-технічних технологій Національний технічний університет України “Київський політехнічний інститут”

Кандидат технических наук, профессор

Д.А. Лесик, Кафедра лазерної техніки фізико-технічних технологій Національний технічний університет України “Київський політехнічний інститут”

Магістр

References

  1. А.Е. Проволоцкий, В.Н. Борисенко. Способ формирования гидроабразивной струи // Патент SU №1237403 В24 С1/00, Бюл. №22, 15.06.1986.
  2. S.C. Tsai, P. Luu, P. Childs, A, Teshome and C.S. Tsai // ‘’The role of capillary waves in two-fluid atomization’’, Phys. Fluids, Vol. 9, pp. 2909 – 2918, 1997.
  3. В.В. Джемелінський, Л.В. Джемелінська, Ю.О. Садовський. Спосіб гідроабразивної обробки поверхонь деталей // Корисна модель №34446 В24 С1/00. Бюл. №15 11.07.2008.
  4. Г.Н. Абрамович. Прикладная газовая механика. – М., Наука, 1975. – 888с.

Downloads

Published

2010-04-06

How to Cite

Джемелінський, В., & Лесик, Д. (2010). Superficial finishing processing of products. Eastern-European Journal of Enterprise Technologies, 2(5(44), 68–70. https://doi.org/10.15587/1729-4061.2010.2673

Issue

Vol. 2 No. 5(44) (2010): The applied physics and materials technology. The applied mechanics

Section

Applied mechanics

License

Copyright (c) 2014 В.В. Джемелінський, Д.А. Лесик

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.