Optimization of flowing parts of gas turbines taking into account modes of operation within the limits of system of the automated designing "Turbine unit"
DOI:
https://doi.org/10.15587/1729-4061.2010.2802Keywords:
optimisation, flowing part, gas-turbine installationsAbstract
The multilevel algorithm of optimization of gasturbine installations turbines flow paths taking into consideration operation modes was developed. The basic capabilities and fields of application of the developed algorithm are shown. Optimal design of the low pressure turbine flow path of installation GT-750-6M was performed.References
- Бойко А.В. Аэродинамический расчёт и оптимальное проектирование проточной части осевых турбин / А.В. Бойко, Ю.Н. Говорущенко, С.В. Ершов, А.В. Русанов, С.Д. Северин – Х.: НТУ «ХПИ», 2002. – 356 с.
- Арзуманов А.М. Многорежимная оптимизация проточной части паровой турбины с учётом изменения параметров тепловой схемы / А.М. Арзуманов, К.Л. Лапшин // Теплоэнергетика. – 2003. – №12. – С. 68-71.
- Бойко А.В. Методика и алгоритм оптимизации проточных частей осевых турбин с учётом режимов эксплуатации / А.В. Бойко, Ю.Н. Говорущенко, А.П. Усатый, А.С. Руденко // Тяжелое машиностроение. – 2009. – №9. – С.11-15.
- Бойко А.В. Интегрированное информационное пространство САПР «Турбоагрегат» – методологическое обеспечение и программная реализация / А.В. Бойко, Ю.Н. Говорущенко, А.П. Усатый // Электронное моделирование.– К.: Академпериодика. – 2009. – №2. – С.43-55.
- Котляр И. В. Переменный режим работы газотурбинных установок. – М.: Машгиз, 1961. – 218 c.
- Rechtschaffner R.L. Saturated fractions of 2n and 3n factorial designs // Technometrics. – 1967. – № 9. – P. 569-575.
- Соболь И.М. Выбор оптимальных параметров в задачах со многими критериями / И.М. Соболь, Р.Б. Статников – М.: Наука, 1981. – 108 с.
- Патон Б. Концепція (проект) державної науково-технічної програми «Створення промислових газотурбінних двигунів нового покоління для газової промисловості та енергетики» / Б. Патон, А. Халатов, Д. Костенко, Б. Білека, О. Письменний, А. Боцула, В. Парафійник, В. Коняхін // Вісн. НАН України. – 2008. – №4. – С. 3-9.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 А.В. Бойко, Ю.Н. Говорущенко, А.П. Усатый, А.С. Руденко
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
