Parasite parameters of the printed circuitry

Authors

  • Владимир Якович Журавлев Кафедра проектирования и эксплуатации электронных аппаратов Харьковский национальный университет радиоэлектроники, Ukraine
  • Олег Иванович Подгайко Кафедра проектирования и эксплуатации электронных аппаратов Харьковский национальный университет радиоэлектроники, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2010.2864

Keywords:

module with printed circuitry, parameters of printing picture, parasite capacity, parasite inductance

Abstract

For the modules with the printing editing considerable influence on the modes their works and stability of functioning render the parasite parameters of the printed circuitry. The account of the similar phenomena at planning of such modules allows multiplying quality of development.

Author Biographies

Владимир Якович Журавлев, Кафедра проектирования и эксплуатации электронных аппаратов Харьковский национальный университет радиоэлектроники

Кандидат технических наук, профессор

Олег Иванович Подгайко, Кафедра проектирования и эксплуатации электронных аппаратов Харьковский национальный университет радиоэлектроники

Кандидат физико-математических наук, доцент

References

  1. Медведев А.М. Печатные платы. Конструкции и материалы. – М.: Техносфера, 2005. – 304 с.
  2. ОУ и компараторы. – М.: Издательский дом «ДодэкаXXI», 2002. – 560 с.
  3. Белинский Б.Т., Гондюл В.П. и др. Практическое пособие по учебному конструированию РЭА. – К: Вища школа, 1992. – 494 с.
  4. Свитенко В.Н., Сапожников А.М. Конструирование и микроминиатюризация РЭА с применением АРМ. – Харьков: ХПИ, 1986.– 96 с.

Downloads

Published

2010-05-28

How to Cite

Журавлев, В. Я., & Подгайко, О. И. (2010). Parasite parameters of the printed circuitry. Eastern-European Journal of Enterprise Technologies, 3(7(45), 49–52. https://doi.org/10.15587/1729-4061.2010.2864

Issue

Vol. 3 No. 7(45) (2010): The applied physics and materials technology

Section

Applied physics

License

Copyright (c) 2014 Владимир Якович Журавлев, Олег Иванович Подгайко

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.