CREATE 3D MODELS OF JAW FRAGMENTS BY RESULTS OF COMPUTED TOMOGRAPHY FOR EFFECTIVE IMPLANTATION

Authors

  • Р.О. Якименко Стоматологический центр Харьковский национальный медицинский университет, Ukraine
  • Д.А. Святненко г. Киев, Ukraine
  • И.Я. Вакуленко Стоматологический центр Харьковский национальный медицинский университет, Ukraine
  • С.Н. Лавриненко Кафедра интегрированных технологий машиностроения Национальный технический университет „Харьковский политехнический институт”, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2010.3068

Keywords:

computer tomography, 3D modelling, implantation

Abstract

The computer tomography now is one of the main methods of diagnostics and a basis for construction 3D models of researched objects for implantation by converting of 2D proceed cuts of the tomogram. The STL-files received as a result of modelling allow to materialize directly the implantation objects by means of various high-efficiency technologies.

Author Biographies

Р.О. Якименко, Стоматологический центр Харьковский национальный медицинский университет

Врач-стоматолог-хирург-имплантолог

Д.А. Святненко, г. Киев

Врач-стоматолог-имплантолог

И.Я. Вакуленко, Стоматологический центр Харьковский национальный медицинский университет

Врач-стоматолог-имплантолог

С.Н. Лавриненко, Кафедра интегрированных технологий машиностроения Национальный технический университет „Харьковский политехнический институт”

Кандидат технических наук, доцент

References

  1. Марусина М.Я., Казначеева А.О. Современные виды томографии. Учебное пособие. – СПб: СПбГУ ИТМО, 2006. – 132 с.
  2. Сизиков В.С. Математические методы обработки результатов измерений: Учебник для вузов. – СПб: Политехника, 2001. – 240 с.
  3. Mamalis A.G., Chuiko A.N., Vakulenko I.J., Yakymenko R.O., Lavrynenko S.N. 3D Modelling of Individual Dental Implants // Материалы междун. научн.-техн. конф. MicroCAD’ 2010, Харьков: НТУ”ХПИ”, 2010. – С. 141.

Downloads

Published

2010-09-30

How to Cite

Якименко, Р., Святненко, Д., Вакуленко, И., & Лавриненко, С. (2010). CREATE 3D MODELS OF JAW FRAGMENTS BY RESULTS OF COMPUTED TOMOGRAPHY FOR EFFECTIVE IMPLANTATION. Eastern-European Journal of Enterprise Technologies, 5(2(47), 63–65. https://doi.org/10.15587/1729-4061.2010.3068

Issue

Vol. 5 No. 2(47) (2010): Information technology

Section

Information technology

License

Copyright (c) 2014 Р.О. Якименко, Д.А. Святненко, И.Я. Вакуленко, С.Н. Лавриненко

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.