Structural features nanocrystalline coatings from powders system Fe-Cr-Mo-B

Authors

  • Галина Николаевна Лукина National University “Lviv Polytechnic “ S. Bandera st., 12, Lviv, Ukraine, 79013, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.3379

Keywords:

Coatings, powder alloys, nanocrystalline structure

Abstract

The structure and formation conditions of pulsed-plasma nanocrystalline coatings with high amorphous component from the modified powder alloys of the system Fe-Cr-Mo-B has been investigated

Author Biography

Галина Николаевна Лукина, National University “Lviv Polytechnic “ S. Bandera st., 12, Lviv, Ukraine, 79013

PhD, Associete Professor

Chair Welding, Diagnostics and Recovery Metal Structures

References

  1. Голубец, В.М. Особенности структуры и свойства аморфизированных импульсно-плазменных покрытий [Текст] / В.М. Голубец., Г.Н. Лукина, В.В. Швец // Физико-химическая механика материалов. – 1992. – Т. 28, №6. – С.56-60.
  2. Быстрозакаленные материалы и покрытия [Текст] : труды 5 Всероссийской с междунар. участием научн.-техн. конф. , Москва МАТИ-РГТУ им. К.Э. Циолковского , 2006. – С.201-205.
  3. Мильман, Ю.В. Микротвердость аморфных металлических сплавов [Текст] / Ю.В. Мильман, С.В.Пан, С.В.Постой и др. // Порошковая металлургия. –1990. –№8. –С.49-53.

Downloads

Published

2012-02-01

How to Cite

Лукина, Г. Н. (2012). Structural features nanocrystalline coatings from powders system Fe-Cr-Mo-B. Eastern-European Journal of Enterprise Technologies, 1(5(55), 22–25. https://doi.org/10.15587/1729-4061.2012.3379

Issue

Vol. 1 No. 5(55) (2012): The applied physics and materials technology

Section

Applied physics

License

Copyright (c) 2014 Галина Николаевна Лукина

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.