Development of the mathematical model of the device tip movement

Authors

  • Олег Леонідович Кондратюк Ukrainian engineering pedagogics academy st. University, 16, Kharkiv, Ukraine, 61003, Ukraine
  • Антон Олегович Скоркін Ukrainian engineering pedagogics academy st. University, 16, Kharkiv, Ukraine, 61003, Ukraine
  • Олена Олегівна Литвинова Ukrainian engineering pedagogics academy st. University, 16, Kharkiv, Ukraine, 61003, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.3405

Keywords:

Rezale’s axes, Lagrange's equation, generalized forces

Abstract

The method of the device co-ordinates choice is considered, the calculations of the device tip stability, determinations of the kinetic energy and generalized forces acting on device are given

Author Biographies

Олег Леонідович Кондратюк, Ukrainian engineering pedagogics academy st. University, 16, Kharkiv, Ukraine, 61003

Candidate of engineering sciences, assistant professor

The chair of metal cutting equipment and transport systems

Антон Олегович Скоркін, Ukrainian engineering pedagogics academy st. University, 16, Kharkiv, Ukraine, 61003

Postgraduate, junior member of teaching

The chair of metal cutting equipment and transport systems

Олена Олегівна Литвинова, Ukrainian engineering pedagogics academy st. University, 16, Kharkiv, Ukraine, 61003

Master

The chair of integrative technologies in machine building

References

  1. Бауман Н.Я. Технология производства паровых и газовых турбин. [Текст] / Бауман Н.Я., Яковлев М.И., Свечков И.Н. М.: Машиностроение, 1973, 464с.
  2. Березкин В.В. Технология турбостроения. [Текст] / Березкин В.В. и др. Л.: Машиностроение, 1980, 720с.
  3. Шубенко-Шубин Л. А. Прочность паровых турбин. [Текст] / Шубенко-Шубин Л. А. и др. М.: Машиностроение, 1973, 449с.

Downloads

Published

2012-02-01

How to Cite

Кондратюк, О. Л., Скоркін, А. О., & Литвинова, О. О. (2012). Development of the mathematical model of the device tip movement. Eastern-European Journal of Enterprise Technologies, 1(7(55), 7–10. https://doi.org/10.15587/1729-4061.2012.3405

Issue

Vol. 1 No. 7(55) (2012): Applied mechanics

Section

Applied mechanics

License

Copyright (c) 2014 Олег Леонідович Кондратюк, Антон Олегович Скоркін, Олена Олегівна Литвинова

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.