Features forming of quality index at making of plastic wares

Authors

  • Светлана Викторовна Сотник Kharkiv National University of Radio Electronics Lenina 14, Kharkov, Ukraine, 61166, Ukraine
  • Евгений Александрович Григоров Kharkiv National University of Radio Electronics Lenina 14, Kharkov, Ukraine, 61166, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.3411

Keywords:

Technological rigging, castable forms, founding

Abstract

In this work the process of management the location of founding is examined in the shape-generating elements castable forms, general view structure of the location management module and model of management synthesis are presented

Author Biographies

Светлана Викторовна Сотник, Kharkiv National University of Radio Electronics Lenina 14, Kharkov, Ukraine, 61166

Ph.D., assistant

Department of Technology and Automation

Евгений Александрович Григоров, Kharkiv National University of Radio Electronics Lenina 14, Kharkov, Ukraine, 61166

Master

Department of Technology and Automation

References

  1. Kennedy P. Development of injection molding simulation // Injection molding: Technology and fundamentals / Ed. by M.R. Kamal, A. Isayev, S.-J. Liu. Hanser, 2009. – P. 553–598
  2. Пантелеев А.П., Пантелеев А.А., Хоменко А.Ю. Избранные литьевые формы / Под ред. А.П. Пантелеева. – «Научные основы и технологии», 2010. – 400 с.
  3. Невлюдов И.Ш. Решение задачи оптимизации расположения поверх-
  4. ностей разъема литьевой формы в САПР / И.Ш. Невлюдов, Е.П. Второв, С.В. Сотник
  5. // Новые технологи в машиностроении. «ХАИ». – 2008. – № 3(54). – С. 95–100.
  6. Лычак М.М. Идентификация и оценивание состояния объектов управления на основе множественного подхода / М.М. Лычак // Проблемы управления и информатики. – 1999. – № 5. – С. 34–41.

Downloads

Published

2012-02-01

How to Cite

Сотник, С. В., & Григоров, Е. А. (2012). Features forming of quality index at making of plastic wares. Eastern-European Journal of Enterprise Technologies, 1(7(55), 27–29. https://doi.org/10.15587/1729-4061.2012.3411

Issue

Vol. 1 No. 7(55) (2012): Applied mechanics

Section

Applied mechanics

License

Copyright (c) 2014 Светлана Викторовна Сотник, Евгений Александрович Григоров

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.