Expediency estimation of high-speed dynamic pumping aggregates implementation with the direct electric drive

Authors

  • Александр Николаевич Гулый Sumy State University Rimski-Korsakov str., 2, Sumy, Ukraine, 40002, Ukraine
  • Анастасия Александровна Кобизская Sumy State University Rimski-Korsakov str., 2, Sumy, Ukraine, 40002, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.3415

Keywords:

High-speed pump, inventor, motor, price

Abstract

The research of high-speed dynamic pumping aggregates implementation with the direct electric drive is performed in this article. Researches are performed for various types of centrifugal pumping aggregates. The main criterion of the conducted research is the relation of the price to a power unit

Author Biographies

Александр Николаевич Гулый, Sumy State University Rimski-Korsakov str., 2, Sumy, Ukraine, 40002

PhD, Associate Professor

Applied Hydro Aeromechanics Department

Анастасия Александровна Кобизская, Sumy State University Rimski-Korsakov str., 2, Sumy, Ukraine, 40002

Post-Graduate

Applied Hydro Aeromechanics Department

References

  1. Михайлов А.К., Малюшенко В.В. Лопастные насосы. Теория, расчет и конструирование. – М.: Машиностроение, 1977. – 288 с.
  2. http://www.osti.gov/bridge. - A Review of PV Inverter Technology Cost and Performance Projections
  3. http://www.federalreserve.gov/pubs/feds/2006/200644/200644pap.pdf. - «Shifting Trends in Semiconductor Prices and the Pace of Technological Progress» Ana Aizcorbe, Stephen D. Oliner, and Daniel E. Sichel
  4. Слепов В.А. Попов Б.В. Вопросы комплексного подхода к ценообразованию в новых экономических условиях.— М.: Система, 2004. - 165 с.
  5. http://www.rimos.ru.
  6. http://www.europump.org/p2112/files/LCC_Executive_Summary.pdf.

Downloads

Published

2012-02-01

How to Cite

Гулый, А. Н., & Кобизская, А. А. (2012). Expediency estimation of high-speed dynamic pumping aggregates implementation with the direct electric drive. Eastern-European Journal of Enterprise Technologies, 1(7(55), 39–42. https://doi.org/10.15587/1729-4061.2012.3415

Issue

Vol. 1 No. 7(55) (2012): Applied mechanics

Section

Applied mechanics

License

Copyright (c) 2014 Александр Николаевич Гулый, Анастасия Александровна Кобизская

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.