Efficiency using hybrid technology for lacquering products

Authors

  • Галина Ивановна Турчинова Kharkiv National University of Radio Electronics Lenina 14, Kharkov, Ukraine, 63000, Ukraine
  • Виктория Павловна Васильева Kharkiv National University of Radio Electronics Lenina 14, Kharkov, Ukraine, 63000, Ukraine
  • Татьяна Анатолиевна Колесникова Kharkiv National University of Radio Electronics Lenina 14, Kharkov, Ukraine, 63000, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.3801

Keywords:

Lacquering, hybrid, UV- printing

Abstract

Three variants of the configuration of the offset sheet printing machine "Rapida 105" are considered to investigate the efficiency of hybrid technology

Author Biographies

Галина Ивановна Турчинова, Kharkiv National University of Radio Electronics Lenina 14, Kharkov, Ukraine, 63000

Senior Lecturer

Department mediasistemy and technologists

Виктория Павловна Васильева, Kharkiv National University of Radio Electronics Lenina 14, Kharkov, Ukraine, 63000

Student

Department mediasistemy and technologists

Татьяна Анатолиевна Колесникова, Kharkiv National University of Radio Electronics Lenina 14, Kharkov, Ukraine, 63000

Doсent

Department mediasistemy and technologists

References

  1. Клееберг Д., Концерн KBA добился внедрения гибридной технологии [Текст]/Д. Клееберг//Журн. «Полиграфия». – 2006. -№4. – М.
  2. Технология лакирования оттисков [Электронный ресурс] /М. - Режим доступа : http://www.vesmash.ru/lacquering-1.html/ 15.02.2012 г. – Загл. С єкрана.
  3. Райхенбергер Р., Гибрид против УФ- и двойного лакирования: считаем деньги [Текст]/ Р.Райхенбергер, А. Перова //Журн. «Курсив». – 2006. - №3. – М. 34-40 с.

Downloads

Published

2012-04-01

How to Cite

Турчинова, Г. И., Васильева, В. П., & Колесникова, Т. А. (2012). Efficiency using hybrid technology for lacquering products. Eastern-European Journal of Enterprise Technologies, 2(9(56), 60–62. https://doi.org/10.15587/1729-4061.2012.3801

Issue

Vol. 2 No. 9(56) (2012): Information and control systems

Section

Information and controlling system

License

Copyright (c) 2014 Галина Ивановна Турчинова, Виктория Павловна Васильева, Татьяна Анатолиевна Колесникова

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.