Nanotechnology implementation in tire utilisation. (part 2)

Authors

  • Инесса Анатольевна Буртная National Technical University of Ukraine "Kiev Polytechnic Institute" Pobeda, 37, Building 4, Kiev, 03056, Ukraine
  • Отар Отарович Гачечиладзе DP "The Georgian-Ukrainian House" lane. Museum, 10, Kiev, 01001, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.3932

Keywords:

Waste utilisation, fractional composition, pyrolysis liquid

Abstract

The results of pyrolis liquid membrane separation on experimental pervaporational plant with the motor fuel components receive are presented

Author Biographies

Инесса Анатольевна Буртная, National Technical University of Ukraine "Kiev Polytechnic Institute" Pobeda, 37, Building 4, Kiev, 03056

Ph.D., Associate Professor

Department of Bioengineering and Engineering

Отар Отарович Гачечиладзе, DP "The Georgian-Ukrainian House" lane. Museum, 10, Kiev, 01001

Ph.D. in Physics and Mathematics

Director

References

  1. Имплементация нанотехнологий в утилизации шин.(Первая часть) [Текст] / Буртная И. //Восточно-европейский журнал передовых технологий. — 2012 — №1/8(55). — С.14–17.
  2. Любители резины [Текст] / Уляницкий Д. // Власть денег. — 2011. — Т. 330. — № 47. — С. 22–27.

Downloads

Published

2012-04-01

How to Cite

Буртная, И. А., & Гачечиладзе, О. О. (2012). Nanotechnology implementation in tire utilisation. (part 2). Eastern-European Journal of Enterprise Technologies, 2(12(56), 50–52. https://doi.org/10.15587/1729-4061.2012.3932

Issue

Vol. 2 No. 12(56) (2012): Ecology

Section

Ecology

License

Copyright (c) 2014 Инесса Анатольевна Буртная, Отар Отарович Гачечиладзе

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.