Assessment of efficiency of processes flowsheets for mek production by means algorithm WAR

Authors

  • Людмила Миколаївна Бугаєва National Technical University of Ukraine "Kiev Polytechnic Institute" Pobeda, 37, Kiev, Ukraine, 03056, Ukraine
  • Андрій Сергійович Задорожний National Technical University of Ukraine "Kiev Polytechnic Institute" Pobeda, 37, Kiev, Ukraine, 03056, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.3966

Keywords:

Waste minimization, potential environmental impact, modeling

Abstract

The possibility of solving the pollution reduction  problem by means waste minimization algorithm WAR using the programs for the material and heat balances calculating of chemical technological processes is considered. The chemical impact of methyl ethyl ketone production on the environment was estimated

Author Biographies

Людмила Миколаївна Бугаєва, National Technical University of Ukraine "Kiev Polytechnic Institute" Pobeda, 37, Kiev, Ukraine, 03056

Ph.D., Associate Professor

Department of Cybernetics of Chemical Process

Андрій Сергійович Задорожний, National Technical University of Ukraine "Kiev Polytechnic Institute" Pobeda, 37, Kiev, Ukraine, 03056

Master

Department of Cybernetics of Chemical Process

References

  1. Hilaly, A.K., Sikdar, S.K. Pollution Balance: New Methodology for Minimizing Waste Production in Manufacturing Processes [Текст] / Hilaly, A.K., Sikdar, S.K. // J. Air and Waste Manage.Assoc. – 1994. -№44. - p.1303.
  2. Cabezas, H., Bare, J. C., Mallick, S.K. Pollution Prevention with Chemical Process Simulators: the Generalized Waste Reduction (WAR) [Текст] / H.Cabezas, J. C.Bare, S.K.Mallick // Algorithm, Computers and Chemical Engineering. – 1997 - Vol. 21 - pp. S305-310.

Published

2012-04-01

How to Cite

Бугаєва, Л. М., & Задорожний, А. С. (2012). Assessment of efficiency of processes flowsheets for mek production by means algorithm WAR. Eastern-European Journal of Enterprise Technologies, 2(14(56), 79–82. https://doi.org/10.15587/1729-4061.2012.3966

Issue

Section

Computer modeling in chemistry, technology and systems for sustainable development