STRESSES IN DEFORMED DISCRETE ELEMENT

Authors

  • Александр Дмитриевич Шамровский Запорожская государственная инженерная академия пр. Ленина, 226, г. Запорожье, 69006, Ukraine
  • Дмитрий Николаевич Колесник Запорожская государственная инженерная академия пр. Ленина, 226, г. Запорожье, 69006, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.4050

Keywords:

discrete model, truth stresses

Abstract

An approach for deformed discrete element of finite size stress finding, that allows building diagrams and charts stresses, is described here.

Author Biographies

Александр Дмитриевич Шамровский, Запорожская государственная инженерная академия пр. Ленина, 226, г. Запорожье, 69006

Доктор технических наук, профессор

Кафедра программного обеспечения автоматизированных систем

Дмитрий Николаевич Колесник, Запорожская государственная инженерная академия пр. Ленина, 226, г. Запорожье, 69006

Аспирант

Кафедра программного обеспечения автоматизированных систем

References

  1. Шамровський А.Д. Напряжения в дискретном элементе конечных размеров [Текст] / А.Д. Шамровский, Д.Н. Колесник // Восточно-Европейский журнал передовых технологий //научный журнал. – Харьков: Технологический центр, 2012. – №2/7 (56). – С. 36–40.
  2. Шамровський А.Д. Решение плоских статических задач механики деформируемого твердого тела при помощи дискретных моделей, получаемых на основе экспериментальных данных [Текст] / А.Д. Шамровский, Ю.А. Лымаренко, Д.Н. Колесник // Проблеми обчислювальної механіки і міцності конструкцій: збірник наукових праць / Дніпропетровський національний університет. — Дніпропетровськ: Ліра, 2011. — Вип. 17. — С. 274–288.
  3. Работнов Ю.Н. Механика деформируемого твердого тела [Текст] : учебное пособие для вузов / Ю.Н. Работнов. — 2-е изд., испр. — М.: Наука. Гл. ред. физ.-мат. лит., 1988. — 712 с.

Downloads

Published

2012-06-01

How to Cite

Шамровский, А. Д., & Колесник, Д. Н. (2012). STRESSES IN DEFORMED DISCRETE ELEMENT. Eastern-European Journal of Enterprise Technologies, 3(7(57), 12–15. https://doi.org/10.15587/1729-4061.2012.4050

Issue

Vol. 3 No. 7(57) (2012): Applied mechanics

Section

Applied mechanics

License

Copyright (c) 2014 Александр Дмитриевич Шамровский, Дмитрий Николаевич Колесник

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.