METHOD OF INCREASING THE STRENGTH OF CONNECTIONSWITH INTERFERENCE
DOI:
https://doi.org/10.15587/1729-4061.2012.4057Keywords:
connection with pull, the area of contact, the durability, the deformationAbstract
A fundamental possibility of increase of durability of connections with a pull without the increase of size of pull in the area of contact is shown, and also certain moving and deformations on the surface of resilient comprehensive element are detected.
References
- Иосилевич Г.Б. Концентрация напряжений и деформаций в деталях машин. М.: Машиностроение, 1981.-224с.
- Крагельский И.В., Добычин М.Н. Основы расчетов на трение и износ. М.: Машиностроение., 1977., 526 с.
- Павленко В.М. Нормування пластичних деформацій валу поза зоною контакту в з’єднаннях з натягом / В.М. Павленко, І.В. Петко, М.П.Галушка // ВІСНИК КНУТД, – 2010, – №1, – С. 51-57
- Пат. 32918 Україна, МПК B23Р 11/02. Спосіб з’єднання деталей з натягом; Павленко В.М., Петко І.В.Заявл.26.12.07; Опубл. 10.08.2008, Бюл. №11, 2008.
- Петко І.В. Підвищення якості з’єднань з натягом, складених з використанням деформуючого протягування / І.В. Петко, В.М. Павленко // Процеси механічної обробки в машинобудуванні: Зб. наук. пр./ Відпов. ред. Г.М. Виговський, – Житомир.: ЖДТУ, 2007. – Вип. 5: у 2-х ч. – Ч. 2. – С. 134-141.
Downloads
How to Cite
Issue
Section
License
Copyright (c) 2014 Володимир Миколайович Павленко, Ігорь Валентинович Петко, Леся Петрівна Мартиненко
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
