Heavy-duty high-speed generator drive gear

Authors

  • Александр Иванович Мироненко Государственное предприятие Научно – производственный комплекс газотурбостроения «Зоря» - «Машпроект» пр. Октябрьский 42а, г. Николаев, Украина, 54018, Ukraine
  • Евгений Анатольевич Гамза Государственное предприятие Научно – производственный комплекс газотурбостроения «Зоря» - «Машпроект» пр. Октябрьский 42а, г. Николаев, Украина, 54018, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.4186

Keywords:

gearbox, gears, torsion shafts, thrust bearing.

Abstract

The article presents design and test results of gearbox for industrial application with power flow splitting in the driving member and combining in the driven member. Singularity of design is that it is constructed without special power thrust bearings to take axial forces from engagements.

Author Biographies

Александр Иванович Мироненко, Государственное предприятие Научно – производственный комплекс газотурбостроения «Зоря» - «Машпроект» пр. Октябрьский 42а, г. Николаев, Украина, 54018

Начальник отдела редукторов

Евгений Анатольевич Гамза, Государственное предприятие Научно – производственный комплекс газотурбостроения «Зоря» - «Машпроект» пр. Октябрьский 42а, г. Николаев, Украина, 54018

Ведущий инженер-конструктор – руководитель группы

References

  1. Высоконагруженные редукторы – новые разработки. Материалы фирмы MAAG Gear Co. Ltd, 1992.
  2. Модификация поверхности зубьев высокоскоростных зубчатых передач в связи с нагревом зубьев. Экспресс информация. Детали машин, 1974, №11.

Downloads

Published

2012-06-01

How to Cite

Мироненко, А. И., & Гамза, Е. А. (2012). Heavy-duty high-speed generator drive gear. Eastern-European Journal of Enterprise Technologies, 3(10(57), 54–56. https://doi.org/10.15587/1729-4061.2012.4186

Issue

Vol. 3 No. 10(57) (2012): Modern technologies in gas-turbine construction

Section

Modern technologies in the gas-turbine

License

Copyright (c) 2014 Александр Иванович Мироненко, Евгений Анатольевич Гамза

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.