AUTOMATED CONTROL OF CHARGE FORMATION ON THE SINTER BELT
DOI:
https://doi.org/10.15587/1729-4061.2012.4509Keywords:
sinter charge, fraction, gas-dynamic resistance, sinter strength, control algorithm, models of the layer charge formation, control action, data collection, compulsory checking.Abstract
The article considers the possibility of automation of the charge formation when the number of points of direct control is limited, and the operational conditions of the equipment are rapidly changing under the influence of external factors. It is reasonably to construct modern automation systems of sinter production, using the digital computer technologies, which are based on the mathematical models of technological processes. The application of the distribution models of charge particles of various chemical and granulometric composition, and its effect on gas-dynamic regime of sinter machine and sinter strength, underlie the creation of the predictive algorithm of the properties of emerging layer. On the basis of the algorithm, the application program was designed to work in real-time and adviser modes. The algorithm has got approval in actual time as an adviser of technological personnel.References
- Пазюк, М.Ю. Исследование сегрегации топлива в слое шихты [Текст] / М.Ю. Пазюк, В.И. Гранковский // Известия вузов. Черная металлургия. - 1982. - № 12. - С. 6-8.
- Абзалов, В.М. Методика оперативного определения коэффициента газодинамического сопротивления слоя окатышей [Текст] / В.М. Абзалов, В.А. Горбачев, В.И. Клейн // Сталь. – 2000. - №12. – С.1-2.
- Абзалов, В.М. Газодинамика слоя сырых окатышей на обжиговой машине [Текст] / В.М. Абзалов, В.И. Клейн // Сталь. - №1. – 2003 г. – С. 17-20.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Ирина Анатольевна Овчинникова
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
