Design of virtual navigation devices for computer flight simulator
DOI:
https://doi.org/10.15587/1729-4061.2012.5338Keywords:
software simulator, virtual instrument, navigation device, simulation model, designAbstract
The article refers to the simulation modeling of air navigation systems. The article describes the software flight simulator created in the software package LabVIEW. The implementation of flight simulation is performed through virtual models of navigation devices: the gyroscope, altimete and compass. The screen form displays the trajectory of the aircraft model in three-dimensional graphic and includes controls. The screen form and functional diagram of software simulator of the airplane flight with virtual instruments in LabVIEW package were developed. The diagram allows representing of current position of the aircraft in a three-dimensional coordinate system, and the trajectory of its flight, on the basis of input data about Euler angles, height, speed and course. The developed virtual instruments (VI) contain the necessary software control modules, calculations and representations of input information introduced with the keyboard and manual manipulator (mouse)
References
- Харченко В.П. Системотехніка та основи проектування аеронавігаційних систем [Текст] / В.П. Харченко, М.І. Валуєв, А.Н. Яппаров. – К. : НАУ, 2003. – 120 с.
- Евдокимов Е.Ю. LabVIEW для радиоинженера : от виртуальной модели до реального прибора [Текст] / Е.Ю. Евдокимов, В.Р. Линдваль, Г.И. Щербаков. – М. : ДМК Пресс, 2007. – 400 с.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Віталій Юрійович Ларін
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.