Simulation of phase structure changes in section mullite refractories - steel slag

Authors

  • Олександр Сергійович Рищенко National Technical University "Kharkiv Polytechnic Institute" Street. Frunze 21, Kharkov, Ukraine, 61002, Ukraine
  • Ярослав Миколайович Пітак National Technical University "Kharkiv Polytechnic Institute" Street. Frunze 21, Kharkov, Ukraine, 61002, Ukraine
  • Георгій Вікторович Лісачук National Technical University "Kharkiv Polytechnic Institute" Street. Frunze 21, Kharkov, Ukraine, 61002, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.5591

Keywords:

Moltencorundum, geometric-topological and topological graph

Abstract

A  topological graph the relationship of elementary tetrahedrons is built and a geometric-topological characteristic of phases of the system is given, areas of suitable refractory materials in technology of fire-resistant materials are given and changes in the phase diagram is constructed in a section of moltencorundum refractory - metallurgical slag

Author Biographies

Олександр Сергійович Рищенко, National Technical University "Kharkiv Polytechnic Institute" Street. Frunze 21, Kharkov, Ukraine, 61002

Junior Researcher

Department of Technology of ceramics, refractories, glass and enamels

Ярослав Миколайович Пітак, National Technical University "Kharkiv Polytechnic Institute" Street. Frunze 21, Kharkov, Ukraine, 61002

Doctor of Technical Sciences, Professor, Deputy Head of Department

Department of Technology of ceramics, refractories, glass and enamels

Георгій Вікторович Лісачук, National Technical University "Kharkiv Polytechnic Institute" Street. Frunze 21, Kharkov, Ukraine, 61002

Doctor of Technical Sciences, professor, head of the research part of the

Department of Technology of ceramics, refractories, glass and enamels

References

  1. Бережной, А. С. Многокомпонентные системы окислов [Текст] / Бережной А. С. – К.: Наукова думка, 1970. – 544 с.
  2. Бережной, А. С. Многокомпонентные щелочные оксидные системы [Текст] / Бережной А. С. – К.: Наукова думка, 1988. – 200 с.
  3. Диаграммы состояния силикатных систем. Справочник. Выпуск первый. Двойные системы [Текст] / Н.А. Торопов, В.П. Барзаковский, В.В. Лапин, Н.Н. Курцева / Под. ред. чл.-корр. АН СССР Н.А. Торопова. – М.: Наука, 1965. – 546 с.
  4. Бабушкин, В. И. Термодинамика силикатов [Текст] / Бабушкин В. И., Матвеев Г. М., Мчедлов-Петросян О. П. – М.: Стройиздат, 1986. – 408 с.
  5. Рыщенко, А.С. Термодинамический анализ реакций в системах, включающих оксид железа и огнеупорные оксиды [Текст] / А.С. Рыщенко, Я.Н. Питак, О.Я. Питак, Ю.О. Соболь // Международная научно-техническая конференция «Технология и применение огнеупоров и технической керамики в промышленности», (Харьков, 24 – 25 апреля 2012 г.) / ПАО «УКРНИИО Имени А.С. Бережного»: тезисы докладов. – Х., 2012. – С. 50.
  6. О геометро-топологической характеристике фаз системы CaO – MgO – FeO – SiO2 [Текст] / Остапенко И. А., Питак Я. Н., Питак О. Я., Рыщенко А. С. // Вісник національного технічного університету “ХПІ” Тематичний випуск: Хімія, хімічні технології та екологія. – Харків: НТУ “ХПІ”, – 2008. – № 39. – C. 120 – 125.
  7. Питак, Я. Н. Моделирование фазового состава в сечении шлак – огнеупор [Текст] / Питак Я. Н., Питак О. Я., Остапенко И. А. – Сборник докладов ІІ семинара – совещания учених, преподавателей, ведущих специалистов и молодых исследователей «Керамика и огнеупоры: перспективные решения и нанотехнологии». – Белгород: БГТУ им. В.Г. Шухова. – 2009. – C. 299 – 303.

Downloads

Published

2012-08-20

How to Cite

Рищенко, О. С., Пітак, Я. М., & Лісачук, Г. В. (2012). Simulation of phase structure changes in section mullite refractories - steel slag. Eastern-European Journal of Enterprise Technologies, 4(6(58), 35–40. https://doi.org/10.15587/1729-4061.2012.5591

Issue

Vol. 4 No. 6(58) (2012): Technology organic and inorganic substances

Section

Technology organic and inorganic substances

License

Copyright (c) 2014 Олександр Сергійович Рищенко, Ярослав Миколайович Пітак, Георгій Вікторович Лісачук

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.