Restoration of worn parts bronze by vibrating of chuck hardening

Authors

  • Антон Олександрович Келемеш Poltava State Agrarian Academy Street. Pans, third, Poltava, 36003, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.5609

Keywords:

Bronze bushings, mechanical vibrations

Abstract

The methods for recovery of bronze bushings camshaft engines using vibration hardening JAMZ are considered

Author Biography

Антон Олександрович Келемеш, Poltava State Agrarian Academy Street. Pans, third, Poltava, 36003

Assistant

Department of repairs of machinery and technology of construction materials

References

  1. Бабичев, А.П. Основы вибрационной технологии . Изд. 2-е, перераб. и доп. / А.П. Бабичев, И.А. Бабичев. – Ростов н/Д: Издательский центр ДГТУ, 2008. – 694 с.
  2. Клименко, В.М. Вибрационная обработка металлов давлением / В.М. Клименко, В.И. Шаповал. – К.: Техника, 1987. – 128 с.
  3. Кудрявцев, Н.В. Внутренние напряжения как резерв прочности в машиностроении / Н.В. Кудрявцев. – М.: Машиностроение, 1981. – 250 с.
  4. Скобло, Т.С. Анализ факторов влияющих на определение связи твёрдость – коэрцитивная сила / Т.С. Скобло, А.И. Сидашенко, М.В. Марченко // Сб. ХДТУСГ. Вып. 39. – Харьков: 2005. – С. 264-270.
  5. Левин В.И. Применение вибрационной обработки / В.И. Левин. – М.: Машиностроение, 1992. – 288 с.

Downloads

Published

2012-08-20

How to Cite

Келемеш, А. О. (2012). Restoration of worn parts bronze by vibrating of chuck hardening. Eastern-European Journal of Enterprise Technologies, 4(7(58), 6–8. https://doi.org/10.15587/1729-4061.2012.5609

Issue

Vol. 4 No. 7(58) (2012): Applied mechanics

Section

Applied mechanics

License

Copyright (c) 2014 Антон Олександрович Келемеш

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.