Linearized discrete mathematical model of hydraulic actuator based on the secant

Authors

  • Генадій Анатолійович Крутіков National Technical University «Kharkov politechnic universuty» Frunze, etc., 21, was Kharkov, Ukraine, 03037, Ukraine
  • Мар'яна Георгіївна Стрижак National Technical University «Kharkov politechnic universuty» Frunze, etc., 21, was Kharkov, Ukraine, 03037, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.5614

Keywords:

Pneumatic aggregates discrete, linearize mathematical model, method of secants

Abstract

A linearize mathematical model of discrete hydraulic taking into account the inertial loads, compressibility and leakage, which is based on replacement of non-linear dependence is not tangent and secant rationally chosen is given in this article

Author Biographies

Генадій Анатолійович Крутіков, National Technical University «Kharkov politechnic universuty» Frunze, etc., 21, was Kharkov, Ukraine, 03037

Doctor of Technical Sciences, professor

Department «Gіdropnevmoavtomatika i gіdroprivod»

Мар'яна Георгіївна Стрижак, National Technical University «Kharkov politechnic universuty» Frunze, etc., 21, was Kharkov, Ukraine, 03037

Graduate student

Department «Gіdropnevmoavtomatika i gіdroprivod»

References

  1. Крутиков, Г.А. О критериях динамического подобия дискретных гидроприводов [Текст] / Г.А. Крутиков, М.Г. Стрижак. – В сб. Восточно-Европейский журнал передовых технологий, 2012. - №2/7(56). – С. 18-21.

Downloads

Published

2012-08-20

How to Cite

Крутіков, Г. А., & Стрижак, М. Г. (2012). Linearized discrete mathematical model of hydraulic actuator based on the secant. Eastern-European Journal of Enterprise Technologies, 4(7(58), 18–20. https://doi.org/10.15587/1729-4061.2012.5614

Issue

Vol. 4 No. 7(58) (2012): Applied mechanics

Section

Applied mechanics

License

Copyright (c) 2014 Генадій Анатолійович Крутіков, Мар'яна Георгіївна Стрижак

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.