Optimization of the quality indicators of co-ordinated the size of holes in the machining

Authors

  • Едуард Андрійович Пащенко Ukrainian Engineering and Pedagogical Academy Street. University, 16, Kharkov, Ukraine
  • Галина Михайлівна Тріщ Ukrainian Engineering and Pedagogical Academy Street. University, 16, Kharkov, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.5857

Keywords:

Machining, stray field of sizes, holes, size deviation, experiment planning, cutting tool

Abstract

Experiment planning to find optimal conditions for producing holes in various materials is carried out. The dependences for the practical of the stray fields of sizes from the base and the positional deviations of the axes of holes are given

Author Biographies

Едуард Андрійович Пащенко, Ukrainian Engineering and Pedagogical Academy Street. University, 16, Kharkov

Ph.D., Associate Professor

Department of Occupational Safety, Standardization and Certification

Галина Михайлівна Тріщ, Ukrainian Engineering and Pedagogical Academy Street. University, 16, Kharkov

Assistant

Department of Integrated Technology in Mechanical Engineering

 

References

  1. Исследование точности обработки деталей на агрегатных станках с применением различных технологических схем: отчет о НИР (итоговый) / УЗПИ: рук. Э.А.Пащенко, В.А. Чепела. – Инн.№Б979436.1 – Харьков, 1980. - 132с.
  2. Справочник технолога по автоматическим линиям / под ред. А.Г.Косиловой. – М.: Машиностроение, 1982. – 320 с.
  3. Душинский В.В. Пуховский Е.С., Радченко С.Г. Оптимизация технологических процессов

Downloads

Published

2012-04-01

How to Cite

Пащенко, Е. А., & Тріщ, Г. М. (2012). Optimization of the quality indicators of co-ordinated the size of holes in the machining. Eastern-European Journal of Enterprise Technologies, 2(1(56), 15–18. https://doi.org/10.15587/1729-4061.2012.5857

Issue

Vol. 2 No. 1(56) (2012): Mechanical engineering technology

Section

Mechanical engineering technology

License

Copyright (c) 2014 Едуард Андрійович Пащенко, Галина Михайлівна Тріщ

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.