Determination of the parameters of technological schemes of ferrites production with a computer system

Authors

  • Eugene Viktorovich Shkurnikov LTD «Genstar» Kyiv, Krynichaya, 2, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2013.9168

Keywords:

computer system, мagnetic characteristics, мodel of Giles – Atterton, technological schemes, production of ferrites.

Abstract

The article describes a computer system for the removal of the magnetic characteristics. It describes a structural scheme of the computer system for the removal of the magnetic characteristics, which consists of the following software modules: the measuring module, the module of determination of the parameters of mathematical models, the module of transformation of parameters of mathematical models, the module of communication with DBMS, the module of determination of the parameters of technological schemes of production of ferrites. The method of determination of the parameters of technological schemes of production of ferrites was considered. The method is based on a comparison of the parameters of technological schemes of production of ferrites with the parameters of the mathematical model of Giles - Atterton. The comparison is made using the group method of data handling. The group method of data handling (GMDH) relates to a family of inductive algorithms for mathematical modeling of multiparametric data. The method is based on the recursive selective selection of models, on the basis of which more complex models can be built. The modeling accuracy at each further step of recursion increases due to the complication of models.

Author Biography

Eugene Viktorovich Shkurnikov, LTD «Genstar» Kyiv, Krynichaya, 2

Computer Systems Engineer

References

  1. Jiles D.C. Theory of ferromagnetic hysteresis / D.C. Jiles, D.L. Atherton // Magnetism and magnetic materials. – 1983. – vol. 61. – pp. 48–68.
  2. Nonlinear transformer model for circuit simulation / Chan J.H., Vladimiresku A., Gao X-Ch., Liebmann P., Valainis J.// IEEE transactions on computer-aided design. – 1991. – vol. 10 – pp. 476–482.
  3. Analytical model for the approximation of hysteresis loop and its application to the scanning tunneling microscope / Rostislav V. Lapshin // Review of Scientific Instruments. – 1995. – vol 66. – pp 4718-4730.
  4. Zidari B. J-A Hysteresis Model Parameters Estimation Using GA [Текст]/ Bogomir Zidari, Damijan Miljavec // Advances in Electrical and Electronic Engineering. – 2005. – Vol. 4. – P. 174–177
  5. Penoyer R. The Properties of Mn-Fe Ferrites [Текст] / R. Penoyer, М. Skafer // Journal of Applied Physics. – 1959. – Vol. 30. – No. 4. – P. 315–321.
  6. Koprivica B. Determination of Characteristics of Feromagnetic Material Using Modern Data Acquisition System [Текст] / Branko Koprivica, Alenka Milovanovic, Milic Djeckic // Serbian Journal of Electrical Engineering. – 2009. – Vol. 6. – No. 3. – P. 451–459.

Downloads

Published

2013-02-05

How to Cite

Shkurnikov, E. V. (2013). Determination of the parameters of technological schemes of ferrites production with a computer system. Eastern-European Journal of Enterprise Technologies, 1(4(61), 55–58. https://doi.org/10.15587/1729-4061.2013.9168

Issue

Section

Mathematics and Cybernetics - applied aspects