Research of linear contraction during continuous aluminum casting

Authors

  • Юрій Павлович Таран ‘Zaporizhzhia Aluminum Industrial Complex’ Public Joint-Stock Company Yuzhnoe Shosse, 15, Zaporizhzhia, 69032, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2013.12413

Keywords:

Aluminum rod, linear contraction, control system of casting and rolling unit

Abstract

Research works of plenty of scientists are dedicated to issues of continuous metals casting and rolling. Nevertheless there are no scientific papers, dealing with research of impact of continuous aluminum crystallization on the length of the casted billet and its velocity after casting.

The speed process of continuous aluminum casting is characterized by an uneven heat exchange lengthwise the billet which is crystallized in the mould of the casting wheel in the temperatures range. It results in the linear metal contraction, so the length of the casted billet changes.

Implementation of the theory of thermal conditions enabled obtaining mathematical expressions for determination of linear metal contraction and its velocity after casting. It can be calculated before its actual occurrence, which allows making pre-emptive actions in the management of production of aluminum products, to manage the process, aiming at not only the deflection of the billet length, but also at perturbations of the casting wheel

Author Biography

Юрій Павлович Таран, ‘Zaporizhzhia Aluminum Industrial Complex’ Public Joint-Stock Company Yuzhnoe Shosse, 15, Zaporizhzhia, 69032

Engineer

References

  1. Technical description of casting and rolling equipment for the production of aluminum products. Milan. Continuus Properzi. − 1992. − C.12 - 23.
  2. History of “Continuus Properzi” [Электронный ресурс]. Режим доступа: URL: www. Properzi.com.
  3. Brocato, С.M. The Properzi Method for Producing Primary or Secon-dary Aluminium Ingots. 8th Aluminium Cast House Technology Conference at Brisbane. − 2003. − C. 27.
  4. Таран, Ю.П. Совершенствование управления скоростными режимами работы технологической линии по производству катанки [Текст] // Ю.П.Таран, А.Н Николаенко. Металлургия. Научные труды Запорожской Государственной Инженерной Академии.− 2007. − Т.16. − С. 139 - 144.
  5. Таран, Ю.П. Исследования динамических режимов процесса ли-тья и проката на технологической линии по производству алюминиевой катанки [Текст] // Ю.П.Таран, А.Н Николаенко. − Доклады 15 международной конференции по автоматическому управлению. 2008 г. Одесса. − С.586 - 590.
  6. Таран, Ю.П. Локальная информационно-измерительная система для контроля параметров технологического процесса [Текст] // Ю.П.Таран, А.Н Николаенко. Металлургия. Научные труды Запорожской Государственной Инженерной Академии. − 2007. − Т.16. − С. 145 - 146.
  7. Добаткин, В.И. Слитки алюминиевых сплавов [Текст] / В.И. Добат-кин. ─ Свердловск: Металлург-издат, 1960. ─ С.112.
  8. Кондратьев, Г.М. Регулярный тепловой режим [Текст] / Г.М. Кон-дратьев. ─ М.: Государственное издательство технико-теоретической литературы. ─ 1954г. ─ С. 26.
  9. Нащекин, В.В. Техническая термодинамика и теплопередача [Текст] / В.В. Нащекин. М.: Высшая школа. ─ 1989. ─ С.346.
  10. Таран, Ю.П. Исследование температурных деформаций алюминиевой заготовки при её непрерывном литье [Текст] // Ю.П.Таран, А.Н Николаенко. − Запорожье: Металлургия. Научные труды Запорожской Государственной Инженерной Академии. − 2010. − Т.22. − С. 174-181.
  11. Таран, Ю.П. Способ управления формированием алюминиевой заготовки [Текст] // Ю.П.Таран, А.Н Николаенко. − Сборник научных трудов Кировоградского Государственного Технического Университета. − 2012. − Т 25. − С. 286 -291.
  12. Technical description of casting and rolling equipment for the production of aluminum products. (1992). Milan. Continuus Pro-perzi, 12 - 23.
  13. History of “Continuus Properzi”. www. Properzi.com.
  14. Brocato, С. (2003). The Properzi Method for Producing Primary or Secondary Aluminium Ingots. 8th Aluminium Cast House Technology Conference at Brisbane, 1, 27.
  15. Taran, U., Nikolaenko, A. (2007). Improving the management of high-speed modes of production line rod. Metallurgy. Scientific works of Zaporizhzhia State Engineering Academy, 16, 139.
  16. Taran, U., Nikolaenko, A. (2008). Research of dynamical regimes of the casting process and rolled production line of aluminum products. Reports of the 15th International Conference on Automatic Control, Odessa, 586 - 590.
  17. Taran, U., Nikolaenko, A. (2007). Local information and measuring system for monitoring process parameters. Metallurgy. Collection of scientific works of Zaporizhzhia State Engineering Academy, 16, 145.
  18. Dobatkin, V. (1960). Aluminum alloy ingots. Metallurgу , 112.
  19. Kondratiev, G. (1954). Regular heat mode. State Publishing House of technical and theoretical literature, 26.
  20. Nashchekin, V. (1989). Engineering Thermodynamics and Heat Transfer . High School, 346.
  21. Taran, U., Nikolaenko, A. (2010). Research of thermal strains in its billet aluminum continuous casting. Metallurgy, Scientific works of Zaporizhzhia State Engineering Academy, 22, 174-181.
  22. Taran U., Nikolaenko A. (2012) A new way to control the formation of aluminum billet. Collection of scientific works of Kirovrgradsky State Technical University, 25, 286.

Downloads

Published

2013-04-25

How to Cite

Таран, Ю. П. (2013). Research of linear contraction during continuous aluminum casting. Eastern-European Journal of Enterprise Technologies, 2(5(62), 38–42. https://doi.org/10.15587/1729-4061.2013.12413

Issue

Vol. 2 No. 5(62) (2013): The applied physics and materials technology

Section

Applied physics

License

Copyright (c) 2014 Юрій Павлович Таран

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.