Application of new materials at converting ship and aviation gas-turbine engines GTE in stationary gas-turbine installations GTI

Authors

  • В.В. Романов ОАО «НПО им. М.В. Фрунзе г. Сумы, Ukraine
  • В.А. Коваль Институт проблем машиностроения им. А.Н. Подгорного НАН Украины г. Харьков, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2010.2748

Keywords:

engine, alloy, resource, strength, compressor, turbine, tall

Abstract

Habits of application of various alloys for the basic units and details stationary GTE, formed on the basis of ship are observed. Results of the comparative analysis of designs of compressors of low and tall pressures GTE DN80, and also the data describing of strength properties of serial materials are resulted. Last achievements in the field of creation of hightemperature alloys aviation GTE are shown.

Author Biographies

В.В. Романов, ОАО «НПО им. М.В. Фрунзе г. Сумы

Кандидат технических наук, доцент, генеральный директор

В.А. Коваль, Институт проблем машиностроения им. А.Н. Подгорного НАН Украины г. Харьков

Доктор технических наук, старший научный сотрудник

References

  1. Каблов Е.Н. Новые коррозионностойкие жаропрочные сплавы и технология получения крупногабаритных турбинных лопаток стационарных ГТУ/ Е.Н. Каблов, Н.Г. Орехов, И.М. Демонис, В.Н. Толораия и др.// LIII научно-техническая сессия по проблемах газовых турбин. 13-14 сентября 2006 г. Тезисы докладов. Москва, 2006. – С.108-109.

Downloads

Published

2010-04-06

How to Cite

Романов, В., & Коваль, В. (2010). Application of new materials at converting ship and aviation gas-turbine engines GTE in stationary gas-turbine installations GTI. Eastern-European Journal of Enterprise Technologies, 3(2(45), 4–7. https://doi.org/10.15587/1729-4061.2010.2748

Issue

Vol. 3 No. 2(45) (2010): Modern technologies in gas-turbine construction. Part I

Section

Modern technologies in the gas-turbine

License

Copyright (c) 2014 В.В. Романов, В.А. Коваль

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.