Some moments of automated electric drive development

Authors

  • Юрій Олексійович Крисан Кафедра електропривода та автоматизації промислових установок Запорізький національний технічний університет, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2010.3366

Keywords:

electric, electric motor, gearbox, solid converter, control system, IGBT-transistor

Abstract

The analysis of modern automated electricdrive, examined trends of its development. The recommendations on the use of electric motors in variable-speed drives. The main directions of research drives, shows the new capabilities control.

Author Biography

Юрій Олексійович Крисан, Кафедра електропривода та автоматизації промислових установок Запорізький національний технічний університет

Кандидат технічних наук, доцент

References

  1. Фираго Б.И. Регулируемые электроприводы переменного тока / Б.И.Фигаро, Л.Б. Павлячик. – Мн.: Техноперспекива, 2006. – 363с.
  2. SIMOCODE pro. Руководство по проектированию, вводу в эксплуатацию, ремонту и обслуживанию. – 2007. – №1.
  3. Многофункциональное реле TeSys T // Мир Автоматизации. – 2008. – №1. – С. 17-19.
  4. Дьяконов В.П. Энциклопедия устройств на полевых транзисторах / В.П. Дьяконов, А.М. Ремнев, В.Ю. Смердов. – Москва: Солон-Р, 2002. – 512 c.

Downloads

Published

2010-11-10

How to Cite

Крисан, Ю. О. (2010). Some moments of automated electric drive development. Eastern-European Journal of Enterprise Technologies, 6(7(48), 43–46. https://doi.org/10.15587/1729-4061.2010.3366

Issue

Vol. 6 No. 7(48) (2010): Energy saving technologies and equipment

Section

Energy-saving technologies and equipment

License

Copyright (c) 2014 Юрій Олексійович Крисан

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.