Simulation modeling of the project planning of screw shaft pipe manufacturing

Authors

  • Леонид Иванович Нефедов Kharkov National Automobile and Highway University street. Timurovtsev, 3, Kharkiv, Ukraine, 61000, Ukraine
  • Игорь Генрихович Ильге Kharkov National Automobile and Highway University street. Timurovtsev, 3, Kharkiv, Ukraine, 61000, Ukraine
  • Дмитрий Александрович Калмыков Kharkov National Automobile and Highway University street. Timurovtsev, 3, Kharkiv, Ukraine, 61000, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.3699

Keywords:

Project management, risk, simulation modeling, screw shaft pipe

Abstract

The simulation model of the project planning of screw shaft pipe manufacturing developed by the method of options analysis for the project with an estimate of work duration based on the accepted level of risk is developed in the article. The example of method realization is resulted for the estimation of process duration

Author Biographies

Леонид Иванович Нефедов, Kharkov National Automobile and Highway University street. Timurovtsev, 3, Kharkiv, Ukraine, 61000

Doctor of Technical Sciences, Professor

Department of automation and computer-integrated technologies

Игорь Генрихович Ильге, Kharkov National Automobile and Highway University street. Timurovtsev, 3, Kharkiv, Ukraine, 61000

Ph.D., Associate Professor

Department of automation and computer-integrated technologies

Дмитрий Александрович Калмыков, Kharkov National Automobile and Highway University street. Timurovtsev, 3, Kharkiv, Ukraine, 61000

Master

Department of automation and computer-integrated technologies

References

  1. Нефёдов, Л.И. Имитационное моделирование реализации проекта ликвидации чрезвычайной природной ситуации на магистральной автомобильной дороге [Текст] / Л.И. Нефёдов, В.Е. Овчаренко, И.Г. Ильге, Ю.Л. Губин – Х.: НИТИП, 2009.  3с.
  2. Богданов, В.В. Управление проектами в Microsoft Project 2002 [Текст] : Учебный курс / В.В. Богданов. - СПб.: Питер, 2003. - 640с., ил.
  3. Лоу, А. М. Имитационное моделирование [Текст] / А. М. Лоу, В. Д. Кельтон. - СПб: "Питер", 2004. - 848 с.
  4. Советов, Б.Я. Моделирование систем. Практикум [Текст] : Учеб. пособие для вузов / Б.Я. Советов, С.А. Яковлев – М.: Высш. шк., 2005. – 295 с.
  5. MS Project 2010 – Управление проектами [Электронный ресурс] - Режим доступа : www/ URL: http://www.microsoftproject.ru/articles.phtml?aid=158#risk — Загл. с экрана.

Downloads

Published

2012-04-01

How to Cite

Нефедов, Л. И., Ильге, И. Г., & Калмыков, Д. А. (2012). Simulation modeling of the project planning of screw shaft pipe manufacturing. Eastern-European Journal of Enterprise Technologies, 2(3(56), 67–70. https://doi.org/10.15587/1729-4061.2012.3699

Issue

Vol. 2 No. 3(56) (2012): Control systems

Section

Control systems

License

Copyright (c) 2014 Леонид Иванович Нефедов, Игорь Генрихович Ильге, Дмитрий Александрович Калмыков

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.