Utilization of granite stone extraction waste for making sidewalk concrete wares
DOI:
https://doi.org/10.15587/1729-4061.2015.43396Keywords:
production waste, rubble, screenings, concrete, construction productsAbstract
Existing directions of processing the screening dust of stone crushing plants, mainly by using in concrete and asphalt concrete production in Ukraine do not allow a significant waste utilization. Using the washed screening dust in the production of sidewalk unreinforced concrete wares, including sidewalk tile is promising and suitable for plants, in case of constructing the processing line at the enterprise since the demand for this type of products has increased in recent years. Laboratory tests on determining the controlled parameters of sidewalk tile samples, such as compression strength of concrete products, tensile strength in bending, wearability, frost-resistance, and water absorption have shown its compliance with Ukrainian quality standards. The widespread introduction of producing sidewalk tile with the screening dust content of more than 40% will lead to considerable reduction of the negative effects of accumulated waste on the environment, in particular, release land under heaps, expand the enterprise work scope and reduce dustiness of atmospheric boundary layer.
References
- Іvanenko, O. І., Kravchenko, K. O., Vіrnik, M. M., Titjuk, A. І. (2012). Use of granite rubble siftings for the production of commercial concrete. Eastern-European Journal of Enterprise Technologies, 2/12 (56), 16–18. Available at: http://journals.uran.ua/eejet/article/view/3923/3591
- Dvorkin, O. L., Zhytkovs'kyj, V. V., Domans'kyj, G. V. (1999). Granitni vidsivy – zapovnjuvach dlja vibropresovanogo betonu. Resursoekonomni materialy, konstrukcii' budivli ta sporudy, 2, 19–24.
- Volkov, M. I., Borshh, I. M., Grushko, I. M., Korolev, I. V. (1975). Dorozhno-stroitel'nye materialy. Moscow: Izd-vo «Transport», 527.
- Jakobson, M. Ja. (2000). Beton dorozhnyj s ispol'zovaniem otsevov droblenija izverzhennyh gornyh porod dlja stroitel'stva avtomobil'nyh dorog. Moscow, 258.
- Zhdanjuk, V. K., Volovyk, O. O., Kostyn, D. Ju., Zhdanjuk, K. V., Makarchev, O. O. (2009). Vlastyvosti asfal'tobetoniv z voloknystoju polimernoju dobavkoju. Nauchno-tehnycheskyj sbornyk «Kommunal'noe hozjajstvo gorodov». Arhytektura y tehnycheskye nauky, 90, 214–217.
- Vajsberg, L. A., Gorbunova, K. N., Kac, M. Je. et. al. (1985). Utilizacija othodov proizvodstva granitnogo shhebnja. Sbornik «Puti jekonomii toplivno-jenergeticheskih i material'nyh resursov v proizvodstve stroitel'nyh materialov». Sankt-Peterburg.
- Vajsberg, L. A., Gorbunova, K. N., Kac, M. Je. (1985). Jekonomija mineral'nyh resursov pri proizvodstve keramicheskih izdelij. Sbornik «Puti jekonomii toplivno-jenergeticheskih i material'nyh resursov v proizvodstve stroitel'nyh materialov». Sankt-Peterburg.
- Alikin, A. V. (2011). Modificirovanie i kondicionirovanie othodov granitnogo shhebnja. Zapiski gornogo instituta, 189, 274–276.
- Geleta, O. (2008). Ukrai'ns'kyj rynok shhebenju z pryrodnogo kamenju. Koshtovne ta dekoratyvne kaminnja, 3 (53), 3–11.
- DSTU B V.2.7-HHH:201X «Materialy posypkovi dlja zymovogo utrymannja vulychno-dorozhn'oi' merezhi. Tehnichni umovy» (proekt, ostatochna redakcija). Minregion Ukrai'ny, 201X, 23 c.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2015 Олена Іванівна Іваненко, Марія Володимирівна Захарова, Олена Юріївна Гожулян
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
