Parameterization of block model of the guiding device of radial-flow pump

Authors

  • Анна Вікторівна Марченко Sumy State University 2 Rimsky-Korsakov Str., Sumy, 40007, Ukraine, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.5627

Keywords:

Guide vane, three-dimensional model parameterization

Abstract

The method of the parameterization of the guiding device’s typical blocks of a radial-flow pump is examined. The results are presented as system of nonlinear equations of the size relationships

Author Biography

Анна Вікторівна Марченко, Sumy State University 2 Rimsky-Korsakov Str., Sumy, 40007, Ukraine

Ph.D., senior teacher

Department of Computer Science, Section of Information Technologies

References

  1. Неня А.В. Особливості побудови тривимірних геометричних моделей напрямних апаратів багатоступеневих відцентрових насосів [Текст]/ А.В. Неня, С.О. Лугова// Всеукраинский научно- технический журнал «Промышленная гидравлика и пневматика».– 2010.– №2 (28).– С. 45–52.
  2. Марченко А.В. Аспeкти компьютерного геометричного моделювання напрямних апаратів багатоступеневих відцентрових насосів[Текст]/ А.В. Марченко// Геометричне та комп’ютерне моделювання. – Харків: ХДУХТ.– 2010.– Вип.27.– С. 99 – 103.
  3. Копорушкин П.А., Партин А.С. Алгоритм расчета параметризированных геометрических расчетов [Электронный ресурс]/ Электронный журнал «Исследовано в России». – Режим доступа: http://zhurnal.ape.relarn.ru/articles/2004/018.pdf.– Заглав. с екрана.
  4. Ковальов С.М. Обчислювальна геометрія [Текст]: навчальний посібник/ С.М. Ковальов, А.В. Золотова.– К.: КНУБА, 2008.– 124 с.

Downloads

Published

2012-08-20

How to Cite

Марченко, А. В. (2012). Parameterization of block model of the guiding device of radial-flow pump. Eastern-European Journal of Enterprise Technologies, 4(7(58), 43–46. https://doi.org/10.15587/1729-4061.2012.5627

Issue

Vol. 4 No. 7(58) (2012): Applied mechanics

Section

Applied mechanics

License

Copyright (c) 2014 Анна Вікторівна Марченко

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.