Modelling of technological process of assemblage by means of IDEF0

Authors

  • Марина Вячеславівна Філіппова National Technical University "KPI" 37, Prospect Peremohy, Kyiv, Ukraine, 03056, Ukraine
  • Марія Олександрівна Демченко National Technical University "KPI" 37, Prospect Peremohy, Kyiv, Ukraine, 03056, Ukraine
  • Сергій Миколайович Матвієнко National Technical University "KPI" 37, Prospect Peremohy, Kyiv, Ukraine, 03056, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2013.11714

Keywords:

Technological preparation of production, technological assemblage, methodology IDEF0, conceptual model

Abstract

The article regards the model of the technological assemblage of items in instrument-making industry, taking into account peculiarities of the industry.

The article describes the technique of modeling of technological preparation of production and shows some of the results of our research in this area.

The main goal of the research is to create a new package of operation and modeling of technological processes of production of equipment and to analyze the main features of modern software tools to automate the design and technological preparation of production.

The article regards the conceptual model of technological preparation of production based on the existing methodology IDEF0, allowing creation of functional models of the process of assemblage, which reflect the structure and function of technological training, and information and material objects flows, which connect the functions.

There is an analysis of the possibility of usage of this methodology for the design of assembly production in instrument-making industry.
The research results can be used to automate the assembly production in instrument-making industry

Author Biographies

Марина Вячеславівна Філіппова, National Technical University "KPI" 37, Prospect Peremohy, Kyiv, Ukraine, 03056

Ph.D, lecturer

Department  of production devices

Марія Олександрівна Демченко, National Technical University "KPI" 37, Prospect Peremohy, Kyiv, Ukraine, 03056

Graduate student

Department  of production devices

Сергій Миколайович Матвієнко, National Technical University "KPI" 37, Prospect Peremohy, Kyiv, Ukraine, 03056

Graduate student

Department  of production devices

References

  1. Методология функционального моделирования IDEF0: Руководящий документ (РД IDEF0 - 2000) [Текст] : [Действующий с 2000г.]. – М. : Госстандарт России, 2000. – 75 с.
  2. Рузина, Е. А. Реализация ИПИ-технологий в разработке автоматизированной системы оперативно-диспетчерского управления инструментальным производством [Текст] / Е. А. Рузина, В. Г. Пластинин, И. Ю. Палкин // Информ. технологии в проектировании и производстве. – 2007. – N 4. – С. 94-100.
  3. Переверзев, М. П. Системы гибкого управления предприятием [Текст] / М. П. Переверзев, Л. Ф. Орлов. – Тула : ТГПУ, 2001. – 153 с.
  4. Федоров, А. В. Управление процессом технического обслуживания и ремонта металлообрабатывающего оборудования [Текст] / А. В. Федоров // Автоматизация: проблемы, идеи, решения: Сб. тру-дов междунар. конф. / Под ред. Ю.Л. Маткина, А.С. Горелова. – Тула: Изд-во Тул. гос.ун-та, – 2003. – С. 118.
  5. Власов, С. Е. Функциональное моделирование процессов проектирования и технологической подготовки производства радиоэлектронной аппаратуры [Текст] / С. Е. Власов, Л. И. Райкин, С. А. Перенков // Информационные технологии в проектировании и производстве. – 2005. – №4, – С. 66-72.
  6. Каз, М. С. Оценка для целей контроля и мотивации в системе процессного управления ремонтной службой [Текст] / М. С. Каз // Вестник Томского государственного университета. Экономика. – 2007. – № 1. – С. 71-79.
  7. Фатхутдинов, Р.А. Организация производства [Текст] / Р.А. Фатхутдинов. – М. : Инфра – М, 2000. – 126 с.
  8. Р50.1.028-2001. Рекомендации по стандартизации. Информационные технологии поддержки жизненного цикла продукции. Методология функционального моделирования [Текст] : [Действующий с 2001г.]. – М. : Госстандарт России, 2001. – 43 с.
  9. Вендров. А.М. CASE-технологии. Современные методы и средства проектирования информационных систем [Текст] / А. М. Вендров. – М.: Финансы и статистика, – 1998. – 48 с.
  10. Марка, Д.А. Методология структурного анализа и проектирования [Текст] / Д.А. Марка, К. МакГоуэн. – М.: МетаТехнология. 1993, – 91 с.
  11. National Institute of Standards and Technology . Integration Definition For Function Modeling (IDEF0). - Washington : Draft Federal Information, 1993. – 116.
  12. Metodologiya funktsional'nogo modelirovaniya IDEF0: Rukovodyashchiy dokument (RD IDEF0 - 2000), (2000). Gosstandart Rossii, 75.
  13. Ruzina E. A. (2007). Realizatsiya IPI-tekhnologiy v razrabotke avtomatizirovannoy sistemy operativno-dispetcherskogo upravleniya instrumental'nym proizvodstvom. Inform. tekhnologii v proektirovanii i proizvodstve. 4, 94–100.
  14. Pereverzev M. P. (2001). Sistemy gibkogo upravleniya predpriyatiem. TGPU, 153.
  15. Fedorov A. V. (2003). Upravlenie protsessom tekhnicheskogo obsluzhivaniya i remonta metalloobrabatyvayushchego oborudovaniya. Avtomatizatsiya: problemy, idei, resheniya, 118.
  16. Vlasov S. E. (2005). Funktsional'noe modelirovanie protsessov proektirovaniya i tekhnologicheskoy podgotovki proizvodstva radioelektronnoy apparatury. Informatsionnye tekhnologii v proektirovanii i proizvodstve, 4, 66–72.
  17. Kaz M. S. (2007). Otsenka dlya tseley kontrolya i motivatsii v sisteme protsessnogo upravleniya remontnoy sluzhboy. Vestnik Tomskogo gosudarstvennogo universiteta. Ekonomika, 1, 71–79.
  18. Fatkhutdinov R.A. (2000). Organizatsiya proizvodstva. Infra, 126.
  19. R50.1.028-2001. Rekomendatsii po standartizatsii. Informatsionnye tekhnologii podderzhki zhiznennogo tsikla produktsii. (2001). Gosstandart Rossii, 43.
  20. Vendrov A.M. (1998). CASE-tekhnologii. Sovremennye metody i sredstva proektirovaniya informatsionnykh sistem. Finansy i statistika, 48.
  21. Marka D.A. (1993). Metodologiya strukturnogo analiza i proektirovaniya. MetaTekhnologiya, 91.
  22. National Institute of Standards and Technology . Integration Definition For Function Modeling (IDEF0), (1993). Washington : Draft Federal Information, 116.

Downloads

Published

2013-04-25

How to Cite

Філіппова, М. В., Демченко, М. О., & Матвієнко, С. М. (2013). Modelling of technological process of assemblage by means of IDEF0. Eastern-European Journal of Enterprise Technologies, 2(3(62), 44–47. https://doi.org/10.15587/1729-4061.2013.11714

Issue

Vol. 2 No. 3(62) (2013): Control systems

Section

Control systems

License

Copyright (c) 2014 Марина Вячеславівна Філіппова, Марія Олександрівна Демченко, Сергій Миколайович Матвієнко

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.