Effect of polyvinylpyrrolidone-silicate modifier on microstructure and properties of polycaproamide
DOI:
https://doi.org/10.15587/1729-4061.2011.1419Keywords:
Рolivinlpirolidon-silicate modifier polycaproamide, the degree of crystallinityAbstract
The effects of the nature polivinlpirolidon-silicate modifier on structure and properties polycaproamide are found. Found that modified polycaproamide observed increase of the crystallinity degree, the border during the tearing strength, heat resistance and leads to a reduction water absorption and technological shrinkageReferences
- Справочник по пластическим массам / Под ред. В.М. Катаєва, В.А. Попова, Б.И. Сажина. Изд. 2-е, дополн. и перераб. – М.: Химия, – 1975, Т.2, 568 с.
- Караман В.М. Структура і термопружність органомінеральних нанокомпозитів на основі поліаміду 6 // Тези доп. V Укр. конференції молодих вчених з високомолек. сполук, м. Київ, 20-21 травня, 2003р. – С. 48.
- Kawasumi M. The discovery of polymer – clay hybrids // J. Polym. Sci. A. – 2004. – Vol.42, №4. – P. 819-824.
- Wanderhart D.L., Asono A., Gilman J.W. NMR measurements related to clay-dispersion quality and organic-modifier stability in nylon-6/clay nanocomposites // Macromolecules. – 2001. – Vol.34, №12. – P. 3819-3822.
- Ганчо А.В., Левицький В.Є., Суберляк О.В. Фізико-хімічні закономірності формування полівінілпіролідон-силікатних нанокомпозиційних матеріалів // Вопросы химии и химической технологии. – 2010. – № 6. – С.55 – 60.
- Rabiej M., Rabiej S. Analiza rentgenowskich krywych dyfrakcyjnych polymerów za pomoca programu komputerowego WAXSFIT/ M. Rabiej, S. Rabiej; Bielsko-Biała. – Warszawa, 2006. – 133 p.
Downloads
How to Cite
Issue
Section
License
Copyright (c) 2014 Володимир Євстахович Левицкий, Андрій Володимирович Ганчо
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
