Automation cutting design of electrotechnical material

Authors

  • Валерий Петрович Путятин Харьковский национальный технический университет сельского хозяйства им. П. Василенка ул. Артёма, 44, г. Харьков, Украина, 61002, Ukraine
  • Пётр Валерьевич Путятин Восточноукраинский филиал ул. Гражданская, 22/26, г. Харьков, Украина, 61003, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2011.1665

Keywords:

Model, automation, cutting, capacitor

Abstract

The formulation of the problem of rational cutting of electrical material for the manufacture of capacitors is considered. A mathematical model of the problem is proposed, its algorithmization and automation of the process of cutting the material are discussed

Author Biographies

Валерий Петрович Путятин, Харьковский национальный технический университет сельского хозяйства им. П. Василенка ул. Артёма, 44, г. Харьков, Украина, 61002

Доктор технических наук, профессор

Кафедра кибернетики

Пётр Валерьевич Путятин, Восточноукраинский филиал ул. Гражданская, 22/26, г. Харьков, Украина, 61003

Студент

Международный Соломонов университет

References

  1. Стоян, Ю. Г. Основная задача геометрического проектирования [Текст] / Ю. Г. Стоян. – Х. : ИПМаш АН УССР, 1983. – 36 с.
  2. Стоян, Ю. Г. Оптимизация технических систем с источниками физических полей [Текст] / Ю. Г. Стоян, В. П. Путятин. – К. : Наук. думка, 1988. – 192 с.
  3. Канторович, Л. В. Рациональный раскрой промышленных материалов [Текст] / Л. В. Канторович, В А. Залгаллер. – Новосибирск : Наука, 1971. – 299 с.
  4. Рвачев, В. Л. Геометрические приложения алгебры логики [Текст] / В. Л. Рвачёв. – К. : Техника, 1967. – 212 с.
  5. Стоян, Ю. Г. Методы и алгоритмы размещения плоских геометрических объектов [Текст] / Ю. Г. Стоян, Н. И. Гиль. – К. : Наук. думка, 1976. – 248 с.
  6. Кузьмичёв, В. Е. Законы и формулы физики [Текст] / В. Е. Кузьмичёв. – К. : Наук. думка, 1986. – 864 с.
  7. Грицюк, Ю. І. Моделювання карт і оптимізація плану розкрою плитних деревних матеріалів на меблеві заготовки [Текст] / Ю. І. Грицюк – Львів : Панорама, 2004. – 524 с.

Downloads

How to Cite

Путятин, В. П., & Путятин, П. В. (2012). Automation cutting design of electrotechnical material. Eastern-European Journal of Enterprise Technologies, 3(9(51), 7–10. https://doi.org/10.15587/1729-4061.2011.1665

Issue

Vol. 3 No. 9(51) (2011): Information and control systems

Section

Information and controlling system

License

Copyright (c) 2014 Валерий Петрович Путятин, Пётр Валерьевич Путятин

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.