Результаты испытаний камеры сгорания ГТД ДГ80 с низкоэмисcионным горелочным устройством на базе трубчатых модулей
DOI:
https://doi.org/10.15587/1729-4061.2009.22016Keywords:
combustion chamber, burner of pipe modules, tube moduleAbstract
The present article gives the survey of the main streams in designing of low-emission combustion chambers with taking into account the modern trends of the gas turbine technologies development. Perspectives of the low-emission combustion chambers development based on application of unique design and aerodynamic mains lice “Bord nozzle” (tube module) are describes and justified. Characteristics of combustion chamber with burner on the basis of pipe modules were investigated
References
- Correa S.M. NOx formation in Lean Premixed Methane Flames / Report Enginneering Systems Laboratory N 89CRD-001, January 1989. – 26p.
- Leonard G., Correa S.M. NOx formation in premixed high – pressure lean methane flame // ASME/ PD Vol. 30, Sing, S.N. ED., 1990. – P. 69 – 74.
- Г.Н. Любчик и др. Когенерационно-утилизационные технологии на базе ГТУ/Под ред. Г.Н. Любчика и Л.Б. Чабановича.- К.: Варта. - 2008.- 188 с.
- Кашапов Р.С. Концепция создания маллоэмиссионной камеры сгорания// Газотурбинные технологии. – 2000. – №4. – с. 16-19.
- Любчик Г.Н., Микулин Г.А., Варламов Г.Б. и др. Использование конструктивных особенностей и аэродинамических эффектов насадка Борда при создании малотоксичных топливосжигающих модулей // Технол. системы. — 2002. — Вып. 1, № 2 (13). - С. 130-133.
- Любчик Г.М., Варламов Г.Б., Говдяк Г.Б. и др. Нова технологія створення камер згорання ГТУ на базі трубчастих модулів // Праці VII Між-нар. наук.-практ. конф. «Нафта і газ України 2002», Київ, 2002 p. - К. , 2002. - С. 27-29.
- Сударев А.В., Маев В.А., Веселовский В.А. Газотурбинные камеры сгорания конструкции НЗЛ // Турбо- и компрессоростроение / Под ред. В.А.Елисеева. — Л. : Машиностроение, 1970.
- Любчик Г.Н. и др. Экологический аудит газогорелочных устройств на основе применения базовых характеристик эмиссии NOx и СО// Экотехнологии и ресурсосбережение.- 2007.- № 4. – С. 64-70.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Г. Н. Любчик, В. В. Романов, В. Г. Ванцовский, В. В. Вилкул
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
