Automation of technological preparation of manufacture of Open Society "Motor Sich" in the environment of the automated system of the technological manufacture preparations ASTMP on the basis of TechCARD/Search
DOI:
https://doi.org/10.15587/1729-4061.2010.2787Keywords:
automated system, process design, integration, CAD/CAM systems, functionality.Abstract
The article is devoted to creation and introduction of the automated system of process design on JSC “Motor Sich” on the base of complex TechCARD/Search. The description of works on introduction of this system, the main principles of construction and functions is cited. Also the description of integration of complex TechCARD/Search with various CAD/CAM systems applied on JSC “Motor Sich” is given.References
- Братухин А.Г., Дмитриев В.Г. Стратегия, концепция, принципы CALS.// Российская энциклопедия CALS. Авиационно-космическое машиностроение/гл. ред. А.Г. Братухин.М.: ОАО «НИЦ АСК».- 2008, C. 15-26.
- Богуслаев В.А., Мозговой В.Ф., Балушок К.Б. и др. Компьютеризация технологической подготовки производства новых изделий // Авиационная промышленность. – 1999, - № 2. – С. 16 – 18.
- Леховицер В.А., Сорокин В.Ф., Балушок К.Б. и др. Информационные технологии в наукоёмком машиностроении: Компьютерное обеспечение индустриального бизнеса / Под общ. ред. А.Г. Братухина. – К.: Техніка, 2001. С. – 456 – 475.
- ГОСТ 34.003-90 Информационная технология. Комплекс стандартов на автоматизированные системы. Термины и определения.
- ГОСТ 2.501-88. Единая система конструкторской документации. Правила учета и хранения.
- А. Суханова. Для авиадвигателестроения NX – вне конкуренции. Интервью Д.Н. Елисеева, директора по ИТ ММПП «Салют»// CAD/CAM/CAE Observer/ #6(36).- 2007, С. 7-14.
- Цветков В.Д. Система автоматизации проектирования технологических процессов. М. “Машиностроение”, 1972
- Булавкин В.В., Хоменко В.В., Потапов П.Ю. Автоматизированная технологическая подготовка производства ракетно-космической техники// Российская энциклопедия CALS. Авиационно-космическое машиностроение/гл. ред. А.Г. Братухин.М.: ОАО «НИЦ АСК».- 2008, С. 318-330.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 А.В. Богуслаев, В.Ф. Мозговой, К.Б. Балушок, В.А. Реученко
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.