Technique of creation of the integrated management information system taking into account the specification of machine-building manufactures
DOI:
https://doi.org/10.15587/1729-4061.2010.3031Keywords:
integrated informative environment, CALS -technologies, IDEF-designs, life cycle of products, machine-building productionAbstract
In the article the basic are resulted and principles of construction of the integrated informative environment (on the basis of application of CALS-technologies) and it is shown that an effective method consists of 14 stages which allow tracing the life cycle of tech products.References
- Павленко П. М. Автоматизовані системи технологічної підготовки розширених виробництв. Методи побудови та управління: Монографія. - К.: Книжкове вид-во НАУ, 2005. - 280 с.
- Азаров В. Н., Леохин Ю. Л. Интегрированные информационные системы управления качеством: учеб. для студентов вузов, обучающихся по специальности ”Упр. качеством”. - М.: Европ. центр по качеству, 2002. - 63 с.
- Пантелеева О. ЕRР на производстве: взгляд сверху // СІО. - 2003. - №5. - С.10-15.
- Мухтаров Г. Внедрение ЕRР-систем. Основные ошибки // Директор ИНФО. - 2003. - №36 (100). - С.10-13.
- Дубова Н. Системы управления производственной информацией // Открытые системы. - 1996. - №3. — С.63-68.
- Яцкевич А., Страузов Д. Построение интегрированной информационной среды предприятия на основе системы управления данными об изделии РDМ SТЕР Suіt // САПР и графика. - 2002. - №6. - С. 12-21.
- Норенков И. П., Кузьмик П. К. Информационная поддержка наукоемких изделий. САLS-технологии. - М.: МГТУ им. Н. 3. Баумана, 2002. - 320 с.
- Робсон М., Уллах Ф. Практическое руководство по реинжинирингу бизнес процессов / Пер. с англ. - М.: Аудит ЮНИТИ, 1997. - 224 с.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Ганна Іванівна Хімічева, Я.В. Ішутко, Павло Володимирович Іванов
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
