Revealing patterns in improving the performance of portable smoke and heat removal devices when using fine sprayed water
DOI:
https://doi.org/10.15587/1729-4061.2024.304999Keywords:
smoke and heat removal device, air injection, temperature reduction coefficient, sprayed water jetAbstract
An issue related to the application of portable smoke and heat removal devices for buildings and structures is to provide for their effectiveness when removing smoke and reducing temperature. That us why the object of this study was a change in the performance of a portable smoke and heat removal device when using finely sprayed water. Improved efficiency of the use of portable smoke and heat removal devices was based on experimental studies. It was proved that the reduction of smoke concentration and temperature in the room to the initial conditions was achieved for independent smoke dispersion in 5340 s, and cooling occurred in 3120 s. With the use of a smoke and heat removal agent during air supply, the smoke dissipated in 720 s, and cooling took 1560 s. And with the simultaneous supply of air and a sprayed jet of water, smoke dispersal occurred in 360 s, and cooling in 1020 s, respectively. To determine the efficiency of the smoke and heat release device, a calculation-experimental method has been devised that makes it possible to estimate the coefficient of the smoke and heat release agent when supplying air and water. According to experimental data, it was calculated that the coefficient of effectiveness of the smoke and heat removal devices when supplying air and water compared to the means when supplying only air increases by 2.1 times. The practical significance is that the results were taken into account when devising methodical recommendations for extinguishing fires. Thus, there are reasons to assert the possibility of targeted regulation of the processes of smoke reduction and temperature reduction through the use of a smoke and heat release device that simultaneously supplies air and finely sprayed water
References
- Wang, J., Zhang, R., Wang, Y., Shi, L., Zhang, S., Liu, J. (2023). Experimental study on combustion characteristics of pool fires in a sealed environment. Energy, 283, 128497. https://doi.org/10.1016/j.energy.2023.128497
- Bray, R. J., Åström, J., Madsen, D., Tretsiakova-McNally, S., Zhang, J., Malmborg, V., van Hees, P. (2023). A comparison of carbon monoxide yields and particle formation at various global equivalence ratios in vitiated and under-ventilated conditions. Fire Safety Journal, 141, 103915. https://doi.org/10.1016/j.firesaf.2023.103915
- Kramer, C., Gerhardt, H. J. (1988). Ventilation and heat and smoke extraction from industrial buildings. Journal of Wind Engineering and Industrial Aerodynamics, 29 (1-3), 303–314. https://doi.org/10.1016/0167-6105(88)90168-7
- Khalid, S., Wang, Z., Zhou, Y., Ji, J. (2023). Numerical modeling on mechanical smoke extraction efficiency of multiple lateral smoke extraction vents system in an immersed tunnel. International Journal of Thermal Sciences, 193, 108548. https://doi.org/10.1016/j.ijthermalsci.2023.108548
- Wang, Z., Zhou, X., Zhu, X., Liu, J. (2023). Numerical Simulation of the Ventilation and Fire Conditions in an Underground Garage with an Induced Ventilation System. Buildings, 13 (8), 2074. https://doi.org/10.3390/buildings13082074
- Li, B., Zhang, W., Li, Y., Zhang, Z., Dong, J., Cui, Y. (2023). Study on the Temperature and Smoke Movement in the Event of a Fire in a Semiclosed Tunnel under Water Spray. Fire, 6 (8), 324. https://doi.org/10.3390/fire6080324
- Tabibian, S. M., Najafabadi, M. K., Shahizare, B. (2019). Review of common fire ventilation methods and Computational Fluid Dynamics simulation of exhaust ventilation during a fire event in Velodrome as case study. SN Applied Sciences, 1 (7). https://doi.org/10.1007/s42452-019-0700-4
- Harish, R., Venkatasubbaiah, K. (2014). Effects of buoyancy induced roof ventilation systems for smoke removal in tunnel fires. Tunnelling and Underground Space Technology, 42, 195–205. https://doi.org/10.1016/j.tust.2014.03.007
- Wald, F., Chlouba, J., Uhlíř, A., Kallerová, P., Štujberová, M. (2009). Temperatures during fire tests on structure and its prediction according to Eurocodes. Fire Safety Journal, 44 (1), 135–146. https://doi.org/10.1016/j.firesaf.2008.05.002
- Alianto, B., Astari, N., Nareshwara, D., Nugroho, Y. S. (2017). Modeling of Smoke Control in Underground Parking-garage Fires. International Journal of Technology, 8 (7), 1296. https://doi.org/10.14716/ijtech.v8i7.779
- Gao, R., Li, A., Hao, X., Lei, W., Deng, B. (2012). Prediction of the spread of smoke in a huge transit terminal subway station under six different fire scenarios. Tunnelling and Underground Space Technology, 31, 128–138. https://doi.org/10.1016/j.tust.2012.04.013
- Liu, Y., Yang, D. (2022). Effects of baffles on heat and contaminant removal for tunnel smoke extraction: Evaluation criteria regarding removal efficiency and flow resistance. Case Studies in Thermal Engineering, 32, 101887. https://doi.org/10.1016/j.csite.2022.101887
- Deng, T., Norris, S., Sharma, R. N. (2023). Stability of smoke stratification under the impact of water sprays with various droplet size ranges in longitudinally ventilated road tunnels. Tunnelling and Underground Space Technology, 140, 105262. https://doi.org/10.1016/j.tust.2023.105262
- Kashef, A., Saber, H. H., Gao, L. (2009). Optimization of Emergency Ventilation Strategies in a Roadway Tunnel. Fire Technology, 47 (4), 1019–1046. https://doi.org/10.1007/s10694-009-0114-8
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Yuriy Tsapko, Vadym Nizhnyk, Vitally Prisyazhnuk, Vadym Benediuk, Ruslan Klymas, Vasyl Lushch, Volodymyr-Petro Parkhomenko, Yarema Velykyi
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.