Investigating the accuracy of the working surface of the rolls, treated the cup to force a rotating tool

Authors

  • Леонид Дмитриевич Мелконов East Ukrainian National University named after Vladimir Dal kv. Molodezni, 20а, Lugansk, Ukraina, 91034, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.3408

Keywords:

Rolling roll, accuracy, work surface, cup cutter

Abstract

Attention is paid to the study of the accuracy of the machined surface of rolls, when applying for finish turning cup forcibly rotating cutters. Gauss theory used to study the accuracy of the machined surface

Author Biography

Леонид Дмитриевич Мелконов, East Ukrainian National University named after Vladimir Dal kv. Molodezni, 20а, Lugansk, Ukraina, 91034

Candidate of technical science ,  docent

Kafedra  «Processes  of treating of materials , machines  and tools»

References

  1. Маталин А. А., Технология машиностроения, Л., Машиностроение, 1985 г. – 549 с.
  2. Жулявян В. В., Исследование качества поверхности при точении жаропрочных сплавов резцами с самовращающейся круговой режцщей кромкой. Автор. Дис….канд. техн. наук, 1965 г. – 157 с.
  3. Солонин И. С. Математическая статистика в технологии машиностроения. М., Машиностроение, 1972 г. – 216 с., с илл.

Downloads

Published

2012-02-01

How to Cite

Мелконов, Л. Д. (2012). Investigating the accuracy of the working surface of the rolls, treated the cup to force a rotating tool. Eastern-European Journal of Enterprise Technologies, 1(7(55), 17–19. https://doi.org/10.15587/1729-4061.2012.3408

Issue

Vol. 1 No. 7(55) (2012): Applied mechanics

Section

Applied mechanics

License

Copyright (c) 2014 Леонид Дмитриевич Мелконов

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.