The effect of the number of turns on the thermal resistance of pulsation heat pipes

Authors

  • Владимир Юрьевич Кравец National Technical University of Ukraine “Kyiv Polytechnic Institute” Prospect Peremogy, 37, Kiev, Ukraine, 03056, Ukraine
  • Евгений Сергеевич Алексеик National Technical University of Ukraine “Kyiv Polytechnic Institute” Prospect Peremogy, 37, Kiev, Ukraine, 03056, Ukraine
  • Александра Юрьевна Аполлонина National Technical University of Ukraine “Kyiv Polytechnic Institute” Prospect Peremogy, 37, Kiev, Ukraine, 03056, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.3779

Keywords:

Pulsation heat pipe, number of turns, thermal resistance

Abstract

This article represents an overview of investigation of effect of number of turns on thermal resistance of pulsation heat pipes. Experimental setup for investigation of this effect, a routine of experiment is described. The characteristics of heat transfer processes that occur when pulsation heat pipe are working. The results of investigation are presented

Author Biographies

Владимир Юрьевич Кравец, National Technical University of Ukraine “Kyiv Polytechnic Institute” Prospect Peremogy, 37, Kiev, Ukraine, 03056

Candidate of Technical Sciences

Department of Nuclear power stations and engineering thermal physics

Евгений Сергеевич Алексеик, National Technical University of Ukraine “Kyiv Polytechnic Institute” Prospect Peremogy, 37, Kiev, Ukraine, 03056

Graduate student

Department of Nuclear power stations and engineering thermal physics

Александра Юрьевна Аполлонина, National Technical University of Ukraine “Kyiv Polytechnic Institute” Prospect Peremogy, 37, Kiev, Ukraine, 03056

Master

Department of Nuclear power stations and engineering thermal physics

References

  1. А.с. 504065 СССР, F28D 15/00 Пульсирующая тепловая труба/ Смирнов Г.Ф., Г.Л. Савченков – 1971.
  2. Patent 4,921,041 U.S.А., F28D 15/02 Structure of a Heat Pipe / Akachi H. 1990.
  3. Кузнецов И.О., Смирнов Г.Ф. Экспериментальное и математическое моделирование характеристик пульсационных тепловых труб (ПТТ)/ И.О. Кузнецов, Г.Ф. Смирнов // Холодильна техніка і технологія. – 2005. – №5. –С. 61-69.
  4. Charoensawan P. Thermal performance of horizontal closed-loop oscillating heat pipes [Текст] / P.Charoensawan, P. Terdtoon// Applied Thermal Engineering. - 2008. – vol. 28, iss. 5-6. – P. 460-466.
  5. Charoensawan P. Closed loop pulsating heat pipes. Part A: parametric experimental investigations [Текст] / P.Charoensawan, S. Khandekar, M. Groll, P. Terdtoon // Applied Thermal Engineering. – 2003. – vol. 23. – P. 2009–2020.
  6. Кравец В.Ю. Влияние количества витков на теплопередающие характеристики пульсационных тепловых труб [Текст] / В.Ю. Кравец, Е.С. Алексеик// Восточно-Европейский журнал передовых технологий. – 2010. – Вып.6/7(48). – С. 59-68.
  7. Кравец В.Ю. Исследование режимов теплообмена в пульсационной тепловой трубе / В.Ю. Кравец, А.Н. Наумова, А.Н. Вовкогон// Технология и конструирование в электронной аппаратуре. – 2010. – №1. – С. 39 – 43.

Downloads

Published

2012-04-01

How to Cite

Кравец, В. Ю., Алексеик, Е. С., & Аполлонина, А. Ю. (2012). The effect of the number of turns on the thermal resistance of pulsation heat pipes. Eastern-European Journal of Enterprise Technologies, 2(8(56), 54–57. https://doi.org/10.15587/1729-4061.2012.3779

Issue

Vol. 2 No. 8(56) (2012): Energy saving technologies and equipment

Section

Energy-saving technologies and equipment

License

Copyright (c) 2014 Владимир Юрьевич Кравец, Евгений Сергеевич Алексеик, Александра Юрьевна Аполлонина

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.