Experimental research of rectilinear translational vibrations of a screen box excited by a ball balancer

Authors

DOI:

https://doi.org/10.15587/1729-4061.2017.101798

Keywords:

inertial vibration exciter, two-frequency vibrations, resonant vibration machine, auto-balancer, inertial screen

Abstract

The vibrations of the screen box excited by the ball balancer are experimentally investigated. The stand of the screen and two-frequency vibration exciter in the form of the ball balancer has been created for this purpose. The elastic supports of the box allow it to perform three principal vibrational motions corresponding to three resonant speeds of the shaft rotation: vertical rectilinear, angular oscillatory around one of two transverse central axes of the box.

During the adjustment of the stand, it has been defined that the ball balancer excites almost ideal two-frequency vibrations of the screen box. The slow frequency corresponds to the rotational speed of the balls centers around the longitudinal axle of the shaft, and the fast one corresponds to the rotational speed of the shaft with the unbalanced mass attached to it. The two-frequency mode arises in a broad range of parameters and its general characteristics can be changed by changing: the mass of the balls and unbalanced mass; angular velocity of the shaft rotation.

It is experimentally defined that the balls get stuck at the lowest resonance frequency, thus exciting the first form of the box vibrations. As a result, the box makes almost pure translational rectilinear vibrations and there are no angular components. In this regard, there is no need to impose additional kinematic constraints on the box motions.

On the assumption that the box makes two-frequency vibrations, in the software package for statistical analysis Statistica, the coefficients in the relevant law have been picked up. At the same time, it has been defined that:

– the process of determination of the coefficients values is stable (robust), the coefficients practically do not vary with the time interval of measurement of the law of the box motion;

– the amplitude of the slow vibrations is directly proportional to the total mass of the balls;

– the amplitude of the fast vibrations is directly proportional to the unbalanced mass.

The discrepancy between the laws of motion obtained experimentally and with the statistical analysis methods is less than 1 %. 

Author Biographies

Volodymyr Yatsun, Central Ukrainian National Technical University Universytetskyi ave., 8, Kropivnitskiy, Ukraine, 25006

PhD, Associate Professor

Department of Road Cars and Building

Gennadiy Filimonikhin, Central Ukrainian National Technical University Universytetskyi ave., 8, Kropivnitskiy, Ukraine, 25006

Doctor of Technical Sciences, Professor

Department of Machine Parts and Applied Mechanics

Kostyantyn Dumenko, Central Ukrainian National Technical University Universytetskyi ave., 8, Kropivnitskiy, Ukraine, 25006

Doctor of Technical Sciences, Associate Professor

Department of Operation and Repair of Machines

Andrey Nevdakha, Central Ukrainian National Technical University Universytetskyi ave., 8, Kropivnitskiy, Ukraine, 25006

PhD

Department of Machine Parts and Applied Mechanics

References

  1. Bulat, A. F., Shevchenko, G. A. (2010). Influence polyfrequency oscillation sieving surfaces of vibrating screens on separation of bulk materials. Scientific Bulletin of National Mining University, 4, 137–143.
  2. Mammov, S. V., Tsypin, E. F., Bratygin, E. V. (2014). Conditions of self-cleaning of the sifting roar surface for a thin hydraulic screening. News of higher education institutions, 5, 106–111.
  3. Bukin, S. L., Kondrakhin, V. P., Belovodsky, V. N., Khomenko, V. N. (2014). Excitation of polyharmonic vibrations in single-body vibration machine with inertia drive and elastic clutch. Journal of Mining Science, 50 (1), 101–107. doi: 10.1134/s1062739114010153
  4. Lapshin, E. S., Shevchenko, A. I. (2012). Analysis of the condition of development vibrating screening at dehydration of mineral raw materials. Geotechnical Mechanics, 101, 84–104.
  5. Garkavenko, E. E., Nazimko, E. I., Bukin, S. L. et. al. (2011). Use of the vibration equipment with the biharmonic mode of fluctuations at enrichment of coals. Coal of Ukraine, 5, 41–44.
  6. Repin, S. V., Sizikov, S. A., Skripilov, A. P. (2013). Theoretical and experimental researches of a vibroshock roar for fractionation of sand. Messenger of civil engineers, 5, 188–193.
  7. Bukin, S. L., Maslov, S. G., Sholda, R. A. (2014). Researches of the four-dipole inertial one-mass vibrocar in the stationary mode. Progressive technologies and systems of mechanical engineering, 1, 49–60.
  8. Belovodsky, V. N., Bukin, S. L. (2015). Excitation poliharmonic oscillations in vibrating machine with nonlinear elastic contactof mobile mass new type. Progressive technologies and systems of mechanical engineering, 1 (51), 32–41.
  9. Bukin, S. L., Kondrakhin, V. P. (2015). Innovative projects of vibration transport technological machines with a printing operating mode. Innovative prospects of Donbass. Doneck, 5–11.
  10. Lapshin, E. S., Shevchenko, A. I., Burov, A. V. (2013). Ways of improvement of vibrational segregation and dehydration of mineral raw materials. Scientific Bulletin of NGU, 3, 45–51.
  11. Antipov, V. I., Dentsov, N. N., Koshelev, A. V. (2014). Dynamics of a parametrically excited vibration machine with an isotropic elastic system. Basic research, 8, 1037–1042.
  12. Makarenkov, O. Yu. (2013). Asymptotic stability of fluctuations of two mass of a resonant roar. Applied mathematics and mechanics, 3, 398–409.
  13. Hurskyi, V. M., Kuzo, I. V., Lanets, O. S. (2010). Providing dual-frequency resonant modes of vibration table compaction concrete mixes. Proceedings of the National University "Lviv Polytechnic", 678, 44–51.
  14. Filimonikhin, G. B., Yatsun, V. V. (2015). Method of excitation of dual frequency vibrations by passive autobalancers. Eastern-European Journal of Enterprise Technologies, 4 (7 (76)), 9–14. doi: 10.15587/1729-4061.2015.47116
  15. Filimonikhin, G. B., Yatsun, V. V. (2016). Investigation of the process of excitation of dual-frequency vibrations by ball auto-balancer of GIL 42 screen. Eastern-European Journal of Enterprise Technologies, 1 (7 (79)), 17–23. doi: 10.15587/1729-4061.2016.59881
  16. Filimonikhin, G., Yatsun, V., Dumenko, K. (2016). Research into excitation of dual frequency vibrational-rotational vibrations of screen duct by ball-type auto-balancer. Eastern-European Journal of Enterprise Technologies, 3 (7 (81)), 47–52. doi: 10.15587/1729-4061.2016.72052
  17. Filimonikhin, G., Yatsun, V., Lichuk, M., Filimonikhina, I. (2016). Research by a 3D modelling of the screen box flat translatory vibrations excited by a ball auto-balancer. Eastern-European Journal of Enterprise Technologies, 6 (7 (84)), 16–22. doi: 10.15587/1729-4061.2016.85460
  18. Filimonikhin, G., Yatsun, V. (2017). Conditions of replacing a single-frequency vibro-exciter with a dual-frequency one in the form of passive auto-balancer. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, 1, 61–68.
  19. Bukin, S. L., Sergeyev, P. V., Bukina, A. S. (2014). Comparison of results of process of crushing in a vibration mill with harmonious and biharmonic operating modes. Quality of mineral raw materials, 149–159.
  20. Bukin, S. L., Maslov, S. G. (2014). Industrial tests of a multidipole inertial vibroroar of a superthin screening. News of the Donetsk mining institute, 1 (34), 138–145.
  21. Levchenko, P. V. (2012). Experimental definition of dependence of efficiency of classification of a vertical vibration screen on a complex of the dominating factors. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, 2, 64–68.
  22. Rudakova, E. V. (2011). Advantages of using a screw inertial screen. Scientific notes of RSSU, 6, 398–400.
  23. Lavendel, E. E. (1981). Vibration technique. Vol. 4. Vibrating processes and machines. Мoscow: Mashynostroenie, 509.
  24. Yablonsky, A. A., Noreyko, S. S. (1966). Course of the theory of fluctuations. Moscow: Vysshaya shkola, 255.
  25. Halafyan, A. A. (2007). STATISTICA 6. Statistical analysis of data. Мoscow: LLC "Binom-Press", 512.

Downloads

Published

2017-06-08

How to Cite

Yatsun, V., Filimonikhin, G., Dumenko, K., & Nevdakha, A. (2017). Experimental research of rectilinear translational vibrations of a screen box excited by a ball balancer. Eastern-European Journal of Enterprise Technologies, 3(1 (87), 23–29. https://doi.org/10.15587/1729-4061.2017.101798

Issue

Vol. 3 No. 1 (87) (2017): Engineering technological systems

Section

Engineering technological systems

License

Copyright (c) 2017 Volodymyr Yatsun, Gennadiy Filimonikhin, Kostyantyn Dumenko, Andrey Nevdakha

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.