Method of construction of membership functions information parameter dynamic modes road rollers

Authors

  • Олена Вікторівна Вікторова Харківський національний автомобільно-дорожній університет, вул. Петровського, 25, м. Харків, 61002, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2011.1184

Keywords:

Road machine, dynamic mode, membership functions

Abstract

The article is studied influence of different membership functions on quality of decision-making. Having applied on result of experimental researches of the dynamical load was developed the method of classification the mode of road machine on the basis of fuzzy logic

Author Biography

Олена Вікторівна Вікторова, Харківський національний автомобільно-дорожній університет, вул. Петровського, 25, м. Харків, 61002

Аспірант

Кафедра метрології та безпеки життєдіяльності

References

  1. Вікторова О. В. Обґрунтування необхідності нечіткого управління елементами бортової інтелектуальної інформаційно-вимірювальної системи дорожньої машини / О. В. Вікторова, А.О. Коваль, Д.Є. Петрукович // сборник научных трудов «Строительство. Материаловедение, Машиностроение» Приднепровская государственная академия строительства и архитектуры. – Днепропетровск : ПГАСА, 2010. – №57. – С.215– 220
  2. Осовский С. Нейронные сети для обработки информации / С. Осовский // пер. с польского И. Д. Рудинского. – М.: Финансы и статистика, 2002. – 344 с.
  3. Гмурман В. Е. Теория вероятностей и математическая статистика: учеб. пособие для вузов / В. Е. Гмурман. – 9-е изд., стер. – М.: Высш. шк., 2003. – 479 с.

Downloads

How to Cite

Вікторова, О. В. (2011). Method of construction of membership functions information parameter dynamic modes road rollers. Eastern-European Journal of Enterprise Technologies, 5(3(53), 11–15. https://doi.org/10.15587/1729-4061.2011.1184

Issue

Vol. 5 No. 3(53) (2011): Control systems

Section

Control systems

License

Copyright (c) 2014 Олена Вікторівна Вікторова

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.