Mathematical model of inverse drains’ calculating through a suction valve of mortar pump

Authors

  • Євген Анатолійович Васильєв Полтавський національний технічний університет імені Юрія Кондратюка пр. Першотравневий, 24, м. Полтава, Україна, 36011, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2011.1458

Keywords:

Inverse drains, valve, mortar pump, mathematical model

Abstract

Mechanism of forming the inverse drains of mortar through suction valve of mortar pump is considered during a pumping tact. The influence of constructive and rheological parameters on their value is also investigated in the work; the mathematical model of this process has been designed by the author of the article

Author Biography

Євген Анатолійович Васильєв, Полтавський національний технічний університет імені Юрія Кондратюка пр. Першотравневий, 24, м. Полтава, Україна, 36011

Кандидат технічних наук, доцент

Кафедра будівельних машин та обладнання ім. Олександра Онищенка

References

  1. Караев М.А. Гидравлика буровых насосов [Текст] / М.А. Караев. – М.:Недра, 1975. – 218 с.
  2. Коробко Б.О. Дослідження робочих процесів розчинонасоса з комбінованим законом руху проточного плунжера: Дис… канд. техн. наук: 05.05.02. – Полтава, 2002. – 166 с.
  3. Кукоба А.Т. Гідропривідний розчинонасос подвійної дії: Дис… канд. техн. наук: 05.05.02 / Кукоба Анатолій Тихонович. – Полтава, 2000. – 142 с.
  4. Насосы и компрессоры / С.А Абдурашитов, А.А. Тупиченков, И.М. Вершинин, С.М. Тененгольц. – М.: Недра, 1974. – 296 с.

Downloads

How to Cite

Васильєв, Є. А. (2011). Mathematical model of inverse drains’ calculating through a suction valve of mortar pump. Eastern-European Journal of Enterprise Technologies, 4(8(52), 21–23. https://doi.org/10.15587/1729-4061.2011.1458

Issue

Vol. 4 No. 8(52) (2011): Energy saving technologies and equipment

Section

Energy-saving technologies and equipment

License

Copyright (c) 2014 Євген Анатолійович Васильєв

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.