Determination method of measuring the parameters and line of digital device

Authors

  • Юрий Александрович Смолин Украинская инженерно-педагогическая академия ул. Университетская 16, г. Харьков, Украина, 61003, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2011.1471

Keywords:

Тelecommunications, measuring, resistance, capacitance, circuit

Abstract

The problems of measurement lines and determine the nature and location of the damage these lines, in order to establish baseline data for the development of a digital device for measuring the parameters of the line

Author Biography

Юрий Александрович Смолин, Украинская инженерно-педагогическая академия ул. Университетская 16, г. Харьков, Украина, 61003

Кандидат технических наук, доцент

Кафедра радиоэлектроники и компьютерных систем

References

  1. Прибор кабельный переносной ПКП - 5. Техническое описание и
  2. инструкция по эксплуатации. 6т2.736.005 ТО.
  3. Парикожка И.А., Шварцман В.О. Определение мест повреждения изоляции кабелей связи [Текст] / И.А. Парикожка, В.О. Шварцман .- М.: Издательство ”Связь”, 1987. - 247с.
  4. Агузаров В.П., Миронов В.Х. Методы и средства определения повреждений в линиях связи [Текст] : учеб. пособие / В.П. Агузаров, В.Х. Миронов . -М.: Додэка, 2007. -402с.

Downloads

How to Cite

Смолин, Ю. А. (2011). Determination method of measuring the parameters and line of digital device. Eastern-European Journal of Enterprise Technologies, 4(9(52), 18–20. https://doi.org/10.15587/1729-4061.2011.1471

Issue

Vol. 4 No. 9(52) (2011): Information and control systems

Section

Information and controlling system

License

Copyright (c) 2014 Юрий Александрович Смолин

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.