Mathematical modeling of vibration the gas turbine engine weel using new materials
DOI:
https://doi.org/10.15587/1729-4061.2011.1705Keywords:
Blading wheel, bandage, spectrum of frequenciesAbstract
The work presents an analysis of influence of orientation of crystallography axes and type of shroud is conducted on the spectrum of natural frequencies, forms and distributing of stress intensity on the vibrations of gas-turbine wheel with the single-crystal uncooled bladesReferences
- Воробьев Ю. С. Материалы и прочность оборудования [Текст] / В.М. Боровков, Л.Б. Гецов, Ю.С. Воробьев и др. // СПб: СПбГПУ, – 2008. – 612 с.
- Шалин Р.Е. Монокристаллы никелевых жаропрочных сплавов [Текст] / Р.Е. Шалин, И.Л. Светлов, Е.Б. Качанов и др.– М.: Машиностроение, 1997. – 336 с.
- Качанов, Е.Б. Состояние и перспективы развития работ по жаропрочным сплавам для лопаток турбин [Текст] / Е.Б.Качанов // Технология лёгких сплавов. – 2005. – №1-4. – C. 10-18
- Прочность материалов и ресурс элементов энергооборудования [Текст]: сб. науч. тр. / под ред. Ю.К. Петерни, Л.Б.Гецова. – СПб, 2009. – Вып. 296. – С. 282-306.
- Численный анализ локализации напряжений в облопачивании турбомашин [Текст] / Ю. С. Воробьев, С. Янецки, Е. В. Тишковец, М. А. Стороженко // Вибрации в технике и технологиях. – 2004. – №6(38) – C. 65–68.
- Воробьев, Ю.С. Совместные колебания ротора ГТД с лопаточным аппаратом / Ю.С. Воробьев, К.Ю. Дьяконенко // Надійність і довговічність машин і споруд. – 2006. – Вип. 26. – С. 45–51.
- Анализ колебаний рабочего колеса ГТД с монокристаллическими неохлаждаемыми лопатками / Ю.С. Воробьев, М.А. Чугай, С.Б. Кулишов, А.Н. Скрицкий // Восточно-Европейский журнал передовых технологий. – 2010. – № 3/2 (45). – С. 48–50.
Downloads
How to Cite
Issue
Section
License
Copyright (c) 2014 Юрий Сергеевич Воробьев, Марина Александровна Чугай
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.