Comparison of cooling ability of asbestic-cement and mesh sprinkler of cooling tower

Authors

  • Владимир Петрович Кравченко Одесский национальный политехнический университет пр. Шевченко, 1, г. Одесса, Украина, 65044, Ukraine
  • Евгений Николаевич Морозов ОП «Южно-Украинская АЭС» г. Южноукраинск, Ukraine
  • Марк Петрович Галацан Одесский национальный политехнический университет пр. Шевченко, 1, г. Одесса, Украина, 65044, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2011.1831

Keywords:

Сooling tower, speed of air, temperature of cooled water

Abstract

The technological calculation of a cooling tower with a pass checker from the asbestos-cement and modern reticulated checker from a polyethylene is executed. Got results, allow executing the feasibility study of reconstruction of cooling tower with pass checker substituting by a modern construction

Author Biographies

Владимир Петрович Кравченко, Одесский национальный политехнический университет пр. Шевченко, 1, г. Одесса, Украина, 65044

Доктор технических наук, доцент, профессор

Кафедра атомных электростанций

Евгений Николаевич Морозов, ОП «Южно-Украинская АЭС» г. Южноукраинск

Магистр, слесарь

Марк Петрович Галацан, Одесский национальный политехнический университет пр. Шевченко, 1, г. Одесса, Украина, 65044

Магистр, аспирант

Кафедра  атомных электростанций

References

  1. Пособие по проектированию градирен (к СНиП 2.04.02-84 «Водоснабжение. Наружные сети и сооружения») / ВНИИ ВОДГЕО Госстроя СССР от 20 марта 1985 г. № 27.
  2. Пономаренко В.С., Арефьев Ю.И. Технологические расчёты башенных градирен // Водоснабжение и санитарная техника. - 2000. - № 7. - С. 17-20.

Downloads

How to Cite

Кравченко, В. П., Морозов, Е. Н., & Галацан, М. П. (2012). Comparison of cooling ability of asbestic-cement and mesh sprinkler of cooling tower. Eastern-European Journal of Enterprise Technologies, 2(8(50), 13–16. https://doi.org/10.15587/1729-4061.2011.1831

Issue

Vol. 2 No. 8(50) (2011): Energy saving technologies and equipment

Section

Energy-saving technologies and equipment

License

Copyright (c) 2014 Владимир Петрович Кравченко, Евгений Николаевич Морозов, Марк Петрович Галацан

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.