Measurement of carbon oxide in the exhaust gases of internal combustion engines

Authors

  • Илья Сергеевич Тимофеев Sevastopol National Technical University Universitetskay 33, Sevastopol, Ukraine, 99053, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2013.18348

Keywords:

optimal sampling, ADC, thermogas dynamic parameters of internal combustion engine

Abstract

The paper is devoted to the problem of searching the optimal parameters of time sampling of random stationary processes. Based on the analysis of existing approaches to this problem, the author suggests the approach developed by S. V. Dotsenko. This approach was applied for determining the optimal parameters of time sampling for the process, reflecting the change of carbon oxide content in exhaust gases of internal combustion engine. The algorithm for calculating the optimal parameters of time sampling was developed. Using the graphical environment of simulation modeling Simulink, the models of analog-digital and digital-analog converters are constructed. Simulation was carried out taking into account the optimal parameters obtained by the method, proposed by S. Dotsenko, and using the Nyquist sampling theorem. Based on the obtained results of relative errors of digital conversion, conclusions on advantages of the method, chosen by the author, were made.

Author Biography

Илья Сергеевич Тимофеев, Sevastopol National Technical University Universitetskay 33, Sevastopol, Ukraine, 99053

Graduate student

Department of Information Systems

References

  1. Первухина, Е. Л. Обнаружение дефектов машиностроительных изделий в ходе приемосдаточных испытаний [Текст] / Е. Л. Первухина, В. В. Голикова, К. Н. Осипов // Проблемы машиностроения и надежность машин. – 2010. – №5 С.97 – 105.
  2. Martyr A. J. Engine testing. Theory and Practice [Текст] / A. J. Martyr, M. A. Plint. – Elsevier Ltd. – 2007. – 459 p.
  3. Осипов К. Н. Контроль качества сборки ДВС на этапе приемосдаточных испытаний [Текст] / К. Н. Осипов // Современные технологии сборки – 2011. – С.147 – 153.
  4. Первухина, Е. Л. Контроль качества сборки машиностроительных изделий по диагностическим параметрам [Текст] / Е. Л. Первухина, В. В. Голикова, К. Н. Осипов // Сборка в машиностроении, приборостроении – 2010. – №6. – С. 14 – 20.
  5. Первухина Е. Л. Оценка состояния машиностроительных изделий в ходе производственных испытаний после сборки [Текст] / Е. Л. Первухина, В. В. Голикова, П. К. Сопин // Сборка в машиностроении, приборостроении – 2009. – №10. – С. 3 – 9.
  6. Первухина Е. Л. Статистическое моделирование машиностроительных изделий по диагностическим параметрам [Текст] / Е. Л. Первухина, В. В. Голикова, П. К. Сопин // Проблемы машиностроения и надежности машин – 2008. – №6. – С. 89 – 95.
  7. Первухина Е.Л. Анализ нестационарных случайных процессов в задачах автоматизации производственных испытаний машиностроительных изделий [Текст] / Е. Л. Первухина, В. В. Голикова // Сборка в машиностроении, приборостроении – 2007. – №8. – С. 29 – 35.
  8. Голикова В. В. Оценка качества сборки двигателей внутреннего сгорания в ходе приемосдаточных испытаний [Текст] / В. В. Голикова, К. Н. Осипов, Е. Л. Первухина // Вестник КузГТУ – 2010. – №6 С. 40 – 45.
  9. Кирьянов К. Г. Оптимальная дискретизация экспериментальных данных для последующей цифровой обработки [Текст] / К. Г. Кирьянов // Вестник Нижегородского университета им. Н.И. Лобачевского – 2008. – C. 39 – 46.
  10. Доценко, С. В. Методы информационной оптимизации систем и процессов [Текст] / С. В. Доценко. – Севастополь: СевНТУ, 2010 – 262 с.
  11. Pervukhina E., Osipov K., & Golikova V. (2010) Detection of engineering products during acceptance testing. Problems of Mechanical Engineering and reliability of machines, 5, 97 – 105.
  12. Martyr A., Plint M. Engine testing. Theory and Practice – Elsevier Ltd – 2007. – 459.
  13. Osipov K. N. (2011) Quality Control engine assembly at the stage acceptance testing. Modern technology assembly 147 – 153.
  14. Pervukhina E., Golikova V., & Sopin P. (2010) Quality control assembly engineering products for diagnostic parameters. Assembling in mechanical engineering, instrument, 6, 14 – 20.
  15. Pervukhina E., Golikova V., & Sopin P. (2009) Assessment of engineering products during manufacturing test after assembly. Assembling in mechanical engineering, instrument, 10, 3 – 9.
  16. Pervukhina E., Osipov K., & Golikova V. (2008) Statistical modeling of engineering products for diagnostic parameters. Problems of engineering and machine reliability of Sciences, 6, 89 – 95.
  17. Pervukhina E., & Golikova V. (2007) The analysis of non-stationary random processes in automation of production testing of engineering products. Assembling in mechanical engineering, instruments, 8, 29 – 35.
  18. Golikova V., Osipov K., & Pervukhina E. (2010) Assessment of the quality of internal combustion engine assembly during the acceptance tests. Vesnik KuzGTU, 9, 40 – 45.
  19. Kir'yanov K. (2008) Optimal sampling of experimental data for further digital processing. Vestnik N.I. Lobachevsky State University 39 – 46.
  20. Dotsenko S. (2010) Optimization methods of information systems and processes. / S. Dotsenko – Sevastopol, Ukraine: SevNTU, 262.

Downloads

Published

2013-10-29

How to Cite

Тимофеев, И. С. (2013). Measurement of carbon oxide in the exhaust gases of internal combustion engines. Eastern-European Journal of Enterprise Technologies, 5(4(65), 49–53. https://doi.org/10.15587/1729-4061.2013.18348

Issue

Vol. 5 No. 4(65) (2013): Mathematics and Cybernetics - applied aspects

Section

Mathematics and Cybernetics - applied aspects

License

Copyright (c) 2014 Илья Сергеевич Тимофеев

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.