Создание основы для нового теплоизоляционного материала

Authors

  • Андрей Александрович Чейлытко Zaporizhia State Engineering Academy, Ukraine
  • Анатолий Михайлович Павленко Днепродзержинский государственный технический университет, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2009.20412

Keywords:

siolit, porous material, silica

Abstract

Work examines and analyzed raw basis for creating the new heater. The indices of quality of raw material and the prescription- technological parameters are given. Are also given the values of the parameters of the drying of basis in the vortex flow for obtaining the minimum thermal conductivity of material.  

Author Biographies

Андрей Александрович Чейлытко, Zaporizhia State Engineering Academy

Candidate of Engineering Sciences, Professor assistant 

Анатолий Михайлович Павленко, Днепродзержинский государственный технический университет

Д.т.н., профессор, декан энергетического факультета

References

  1. Патент UA 3802 С2. МПК C04B14/00, C04B20/04, C0-4B22/06. Сировинна суміш пористого заповнювача для бетону та спосіб його одержання. Сланевський С.І., Мартинов В.І. Заявл. 20.10.1992. Опубл. 27.12.1994, Бюл. №15 1994.
  2. Хартман К. Планирование эксперимента в исследовании технологических процессов / К. Хартман – М. : Мир, 1977. – 552 с.
  3. Тепло- и массообмен. Теплотехнический эксперимент: Справочник / Е. В. Аметистов, В. А. Григорьев, Б. Т. Емцев и др.; Под общ. ред. В.А. Григорьева и В. М. Зорина. – М.: Энергоиздат, 1982. – 512 с.

Downloads

Published

2014-01-24

How to Cite

Чейлытко, А. А., & Павленко, А. М. (2014). Создание основы для нового теплоизоляционного материала. Eastern-European Journal of Enterprise Technologies, 3(7(39), 13–15. https://doi.org/10.15587/1729-4061.2009.20412

Issue

Vol. 3 No. 7(39) (2009): Applied physics and materials science. Applied mechanics

Section

Applied physics and Materials Science

License

Copyright (c) 2014 Андрей Александрович Чейлытко, Анатолий Михайлович Павленко

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.