Establishing regularities in the insulating capacity of a foaming agent for localizing flammable liquids
DOI:
https://doi.org/10.15587/1729-4061.2020.215130Keywords:
protective equipment, fire resistance, weight loss, surface treatment, insulation of flammable liquid, diffusionAbstract
Designing environmentally friendly protective materials for flammable liquids makes it possible to influence the processes of heat resistance and the physical-chemical properties of a protective coating over a certain time until the emergency is eliminated. Therefore, there is a need to study the conditions that form a barrier for thermal conductivity and to define a mechanism for decelerating the transfer of heat to a flammable liquid by using a foaming agent. Given this, a mathematical model has been built for the process of changing the concentration of a foaming agent when used as a coating. Based on the experimental data, it was established that the foaming layer destruction process took place over 618 s until the achieved critical thickness of the foaming layer made the conductivity cease. According to the derived dependences, the concentration value was calculated at which the critical value of the foaming layer thickness is achieved, which leads to the ignition of a flammable liquid, and is about 25 %. It has been proven that the process of decelerating the temperature involves the decomposition of a foaming agent under the influence of the temperature, with heat absorption and foam release, the insulation of heat at the surface of the flammable liquid. Given this, it has become possible to define the conditions for protecting flammable liquids using foaming agents by forming a barrier to thermal conductivity. Experimental studies have confirmed that under the influence of water evaporation and foaming agent diffusion into a layer of the flammable liquid, the critical amount of the foaming agent reached a minimum in 606 s and only then the flammable liquid ignited. Thus, there is reason to argue about the possibility of using foaming agents to protect the leaks of flammable liquids, capable of forming a protective layer at the surface of the material. It also becomes possible to establish methods for assessing the insulating capacity of a foaming agent that could inhibit the rate of temperature penetration and the release of flammable liquids' vaporsReferences
- Krivenko, P., Petropavlovskyi, O., Kovalchuk, O., Rudenko, I., Konstantynovskyi, O. (2020). Enhancement of alkali-activated slag cement concretes crack resistance for mitigation of steel reinforcement corrosion. E3S Web of Conferences, 166, 06001. doi: https://doi.org/10.1051/e3sconf/202016606001
- Krivenko, P. V., Petropavlovskyi, O. M., Rudenko, I. I., Konstantynovskyi, O. P., Kovalchuk, A. V. (2020). Complex multifunctional additive for anchoring grout based on alkali-activated portland cement. IOP Conference Series: Materials Science and Engineering, 907, 012055. doi: https://doi.org/10.1088/1757-899x/907/1/012055
- Tsapko, Y., Lomaha, V., Bondarenko, O. P., Sukhanevych, M. (2020). Research of Mechanism of Fire Protection with Wood Lacquer. Materials Science Forum, 1006, 32–40. doi: https://doi.org/10.4028/www.scientific.net/msf.1006.32
- Tsapko, Y., Zavialov, D., Bondarenko, O., Marchenco, N., Mazurchuk, S., Horbachova, O. (2019). Determination of thermal and physical characteristics of dead pine wood thermal insulation products. Eastern-European Journal of Enterprise Technologies, 4 (10 (100)), 37–43. doi: https://doi.org/10.15587/1729-4061.2019.175346
- Tsapko, Y. V., Tsapko, A. Yu., Bondarenko, O. P., Sukhanevych, M. V., Kobryn, M. V. (2019). Research of the process of spread of fire on beams of wood of fire-protected intumescent coatings. IOP Conference Series: Materials Science and Engineering, 708, 012112. doi: https://doi.org/10.1088/1757-899x/708/1/012112
- Tsapko, Y., Bondarenko, O. P., Tsapko, A. (2019). Research of the Efficiency of the Fire Fighting Roof Composition for Cane. Materials Science Forum, 968, 61–67. doi: https://doi.org/10.4028/www.scientific.net/msf.968.61
- Tsapko, Y., Tsapko, О., Bondarenko, O. (2020). Determination of the laws of thermal resistance of wood in application of fire-retardant fabric coatings. Eastern-European Journal of Enterprise Technologies, 2 (10 (104)), 13–18. doi: https://doi.org/10.15587/1729-4061.2020.200467
- Tsapko, Y. V., Tsapko, A. Y., Bondarenko, O. P. (2020). Modeling of thermal conductivity of reed products. IOP Conference Series: Materials Science and Engineering, 907, 012057. doi: https://doi.org/10.1088/1757-899x/907/1/012057
- Rivai, M., Hambali, E., Suryani, A., Fitria, R., Firmansyah, S., Pramuhadi, G. (2018). Formulation and performance test of palm-based foaming agent concentrate for fire extinguisher application. IOP Conference Series: Earth and Environmental Science, 141, 012026. doi: https://doi.org/10.1088/1755-1315/141/1/012026
- Rakowska, J. (2018). Best practices for selection and application of firefighting foam. MATEC Web of Conferences, 247, 00014. doi: https://doi.org/10.1051/matecconf/201824700014
- Sheng, Y., Jiang, N., Sun, X., Lu, S., Li, C. (2017). Experimental Study on Effect of Foam Stabilizers on Aqueous Film-Forming Foam. Fire Technology, 54 (1), 211–228. doi: https://doi.org/10.1007/s10694-017-0681-z
- Sheng, Y., Lu, S., Xu, M., Wu, X., Li, C. (2015). Effect of Xanthan Gum on the Performance of Aqueous Film-Forming Foam. Journal of Dispersion Science and Technology, 37 (11), 1664–1670. doi: https://doi.org/10.1080/01932691.2015.1124341
- Jia, X., Luo, Y., Huang, R., Bo, H., Liu, Q., Zhu, X. (2020). Spreading kinetics of fluorocarbon surfactants on several liquid fuels surfaces. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 589, 124441. doi: https://doi.org/10.1016/j.colsurfa.2020.124441
- Zhang, X.-Z., Bao, Z., Hu, C., Li-Shuai, J., Chen, Y. (2017). Organic pollutant loading and biodegradability of firefighting foam. IOP Conference Series: Earth and Environmental Science, 94, 012137. doi: https://doi.org/10.1088/1755-1315/94/1/012137
- Sheng, Y., Jiang, N., Lu, S., Li, C. (2018). Fluorinated and fluorine-free firefighting foams spread on heptane surface. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 552, 1–8. doi: https://doi.org/10.1016/j.colsurfa.2018.05.004
- Hinnant, K. M., Conroy, M. W., Ananth, R. (2017). Influence of fuel on foam degradation for fluorinated and fluorine-free foams. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 522, 1–17. doi: https://doi.org/10.1016/j.colsurfa.2017.02.082
- He, Y.-H., Sun, Q., Xing, H., Wu, Y., Xiao, J.-X. (2018). Cationic–anionic fluorinated surfactant mixtures based on short fluorocarbon chains as potential aqueous film-forming foam. Journal of Dispersion Science and Technology, 40 (3), 319–331. doi: https://doi.org/10.1080/01932691.2018.1468262
- Jia, X., Bo, H., He, Y. (2019). Synthesis and characterization of a novel surfactant used for aqueous film-forming foam extinguishing agent. Chemical Papers, 73 (7), 1777–1784. doi: https://doi.org/10.1007/s11696-019-00730-z
- Potter, M. C. (2019). Engineering analysis. Springer. doi: https://doi.org/10.1007/978-3-319-91683-5
- Movchan, T. G., Rusanov, A. I., Soboleva, I. V., Khlebunova, N. R., Plotnikova, E. V., Shchekin, A. K. (2015). Diffusion coefficients of ionic surfactants with different molecular structures in aqueous solutions. Colloid Journal, 77 (4), 492–499. doi: https://doi.org/10.1134/s1061933x15040146
- Tureková, I., Balog, K. (2010). The Environmental Impacts of Fire-Fighting Foams. Research Papers Faculty of Materials Science and Technology Slovak University of Technology, 18 (29), 111–120. doi: https://doi.org/10.2478/v10186-010-0033-z
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2020 Yuriy Tsapko, Ivan Rogovskii, Liudmyla Titova, Tamara Bilko, Аleksii Tsapko, Olga Bondarenko, Serhii Mazurchuk
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.