Estimating the dynamics of a machine-tractor assembly considering the effect of the supporting surface profile
DOI:
https://doi.org/10.15587/1729-4061.2021.225117Keywords:
machine-tractor assembly, mathematical model of the wheel, profile of bearing surface, amplitude of vibration accelerations, spectral density of profile heightAbstract
Results of theoretical studies of dynamics of the machine-tractor assembly taking into account the influence of a bearing surface profile were presented. It was established that in the course of operation, the machine-tractor assembly is exposed to a number of external factors leading to a change of vertical loads on the chassis and the engine. Mathematical models of dynamics of a tractor and a machine and a tractor unit consisting of a tractor of pivotally connected arrangement and a trailed sower were constructed. Such models make it possible to study dynamics and oscillatory processes of multi-element units. A mathematical model of tractor wheel dynamics was formed. Speeds and angles of orientation of elements of the machine-tractor assembly in space were determined. Influence of profile of the bearing surface on the unit elements when moving in the field prepared for sowing and the field after plowing was calculated. Theoretical studies of the influence of the bearing surface profile on dynamics of the machine-tractor assembly were performed on the example of KhTZ-242K tractor and Vega-8 Profi sower (Ukraine). When moving, the sower frame has a smaller amplitude of vibration accelerations than that of the tractor. Accordingly, the tractor has higher oscillation energy because it rests on the ground through its wheels having appropriate stiffness. The sower moves with its working bodies immersed into the soil which leads to a decrease in the amplitude of oscillations. The highest energy of amplitude of oscillation accelerations of the sower frame in the vertical direction was observed at frequencies of 15.9; 23.44; 35.3 and 42.87 Hz. It was found that the increase in working speeds of agricultural units leads to the fact that oscillations of all components reach significant values. This entails an increase in dynamic loads on soil and, as a consequence, its compaction
References
- Shabana, A. A. (2013). Dynamics of Multibody Systems. Cambridge University Press, 384. doi: https://doi.org/10.1017/cbo9781107337213
- Wong, J. Y. (2008). Theory of ground vehicles. Wiley, 592. Available at: https://www.wiley.com/en-us/Theory+of+Ground+Vehicles%2C+4th+Edition-p-9780470170380
- Zhutov, A. G., Karsakov, A. A., Avramov, V. I. (2013). Formation of towed load depending on the moment of resistance. Traktory i sel'hozmashiny, 2, 24–25. Available at: https://www.elibrary.ru/item.asp?id=18851435
- Werner, R., Kormann, G., Mueller, S. (2012). Dynamic modeling and path tracking control for a farm tractor towing an implement with steerable wheels and steerable drawbar. 2nd Commercial Vehicle Technology Symposium. Kaiserslautern, 241–250.
- Bulgakov, V., Ivanovs, S., Adamchuk, V., Antoshchenkov, R. (2019). Investigations of the Dynamics of a Four-Element Machine-and-Tractor Aggregate. Acta Technologica Agriculturae, 22 (4), 146–151. doi: https://doi.org/10.2478/ata-2019-0026
- Blundell, M., Harty, D. (2004). The Multibody Systems Approach to Vehicle Dynamics. Butterworth-Heinemann, 288. doi: https://doi.org/10.1016/b978-0-7506-5112-7.x5000-3
- Antoshchenkov, R. V. (2017). Dynamika ta enerhetyka rukhu bahatoelementnykh mashynno-traktornykh ahrehativ. Kharkiv: KhNTUSH, 244. Available at: http://dspace.khntusg.com.ua/handle/123456789/1186
- Cutini, M., Brambilla, M., Bisaglia, C. (2017). Whole-Body Vibration in Farming: Background Document for Creating a Simplified Procedure to Determine Agricultural Tractor Vibration Comfort. Agriculture, 7 (10), 84. doi: https://doi.org/10.3390/agriculture7100084
- Dzyuba, O., Dzyuba, A., Polyakov, A., Volokh, V., Antoshchenkov, R., Mykhailov, A. (2019). Studying the influence of structural-mode parameters on energy efficiency of the plough PLN-3-35. Eastern-European Journal of Enterprise Technologies, 3 (1 (99)), 55–65. doi: https://doi.org/10.15587/1729-4061.2019.169903
- Lenzuni, P., Deboli, R., Preti, C., Calvo, A. (2016). A round robin test for the hand-transmitted vibration from an olive harvester. International Journal of Industrial Ergonomics, 53, 86–92. doi: https://doi.org/10.1016/j.ergon.2015.10.006
- Pazooki, A., Cao, D., Rakheja, S., Boileau, P.-É. (2011). Ride dynamic evaluations and design optimisation of a torsio-elastic off-road vehicle suspension. Vehicle System Dynamics, 49 (9), 1455–1476. doi: https://doi.org/10.1080/00423114.2010.516833
- Guan, D., Fan, C., Xie, X. (2005). A dynamic tyre model of vertical performance rolling over cleats. Vehicle System Dynamics, 43 (sup1), 209–222. doi: https://doi.org/10.1080/00423110500109398
- Besselink, I. J. M., Schmeitz, A. J. C., Pacejka, H. B. (2010). An improved Magic Formula/Swift tyre model that can handle inflation pressure changes. Vehicle System Dynamics, 48 (sup1), 337–352. doi: https://doi.org/10.1080/00423111003748088
- Pacejka, H. (2012). Tire and Vehicle Dynamics. Butterworth-Heinemann, 672. doi: https://doi.org/10.1016/c2010-0-68548-8
- Taylor, R. K., Bashford, L. L., Schrock, M. D. (2000). Methods for measuring vertical tire stiffness. Transactions of the ASAE, 43 (6), 1415–1419. doi: https://doi.org/10.13031/2013.3039
- Jazan, R. N. (2014). Vehicle dynamics: Theory and Application. Springer. doi: http://doi.org/10.1007/978-1-4614-8544-5
- Wille, R., Bohm, F., Duda, A. (2005). Calculation of the rolling contact between a tyre and deformable ground. Vehicle System Dynamics, 43, 483–492. doi: https://doi.org/10.1080/00423110500139759
- Melnik, V., Antoshchenkov, R., Antoshchenkov, V., Kis, V., Galych, I. (2019). Results of experimental studies of tractor type dynamics ХТЗ-243K. Visnyk KhNTUSH imeni Petra Vasylenka, 198, 181–187. Available at: http://dspace.khntusg.com.ua/bitstream/123456789/10461/1/26.pdf
- Wee, B. S., Yahya, A., Suparjo, B. S., Othman, I. (2002). Mobile, automated, 3-axis laser soil surface profile digitizer. Biological, agricultural and food engineering: Proceedings of 2nd Word Engineering Congress (WEC2002), Engineering innovation and sustainability: Global challenges and issues. Kuching, 319–326.
- Kabir, M. S. N., Ryu, M.-J., Chung, S.-O., Kim, Y.-J., Choi, C.-H., Hong, S.-J., Sung, J.-H. (2014). Research Trends for Performance, Safety, and Comfort Evaluation of Agricultural Tractors: A Review. Journal of Biosystems Engineering, 39 (1), 21–33. doi: https://doi.org/10.5307/jbe.2014.39.1.021
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Иван Васильевич Галич, Роман Викторович Антощенков, Виктор Николаевич Антощенков, Игорь Михайлович Лукьянов, Сергей Михайлович Дюндик, Кись Александр Викторович Кись
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.